Those numbers refer to DDR-3 RAM memory, specifically, to its CAS Latency.
CAS Latency essentially refers to the speed at which the RAM will be accessed to acquire information.
Each number refers to the number of MTs (megatransfers per second) the RAM can deliver as opposed to a processor, which is cycles per second.
A DDR-3 1066 will operate at a command rate of 533 MHz and a cycle time of 1.875 nanoseconds.
A DDR-3 1333 will operate at a command rate of 666 MHz and a cycle time of 1.5 nanoseconds.
Currently the fastest on the market I've seen is DDR-3 1600, at 800 MHz and cycle time of 1.25 nanoseconds.
Yes it will 1333mhz is the bus speed of the CPU, however the RAM speed is DDR 2 1066 which means 1066 x 2 bandwidth making it 2132 which is higher bandwidth than the CPU anyway.
1600, 1333, 1066, or 800 MHz
1333.00
1333 ÷ 3 = 444 yards 1 foot
-1.333 as a fraction is -1 1/3 or (if you want the mixed fraction) -4/3
Standard (DDR, DDR2, DDR3 as it must be the same as your motherboard) Speed (800, 1066, 1333 again must match the motherboard for optimization, can't exceed it) Size/capacity (GBS, # of sticks)
he rating for RIMM memory is based on the maximum theoretical bandwidth (in MHz) and included speed ratings of 800 MHz, 1066 MHz, 1200 MHz, 1333 MHz, and 1600 MHz.
1.333 kilometers in 1333 meters. The prefix "kilo" means "thousand".
From 1333 to 1323 BC was the time in which he ruled.
You can be either "computer literate", meaning you are knowledgeable about computers or you can be "computer illiterate", meaning you have no knowledge of computers.
October 14th 1066
Hitler had nothing to do with 1333. It was well before his lifetime.