0
What is the mechanical advantage of a machine that requires 30 end of input force to provide 15 end of output force?
Wiki User
∙ 7y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How does a greater mechanical advantage benefit a machine?
Lever: A lever consists of a rigid bar (the lever arm) that pivots around a fixed point called the fulcrum. By applying a force at one end of the lever, you can lift or move a load at the other end. Depending on the positions of the force and load relative to the fulcrum, levers can amplify force or distance. Pulley: A pulley is a wheel with a groove that holds a rope, cable, or belt. When you pull on one end of the rope, it moves the load attached to the other end. Fixed and movable pulleys can change the direction of force or provide a mechanical advantage, making it easier to lift heavy objects. Wheel and Axle: A wheel and axle consist of a larger wheel connected to a smaller axle. When force is applied to the wheel, it generates rotational motion that can be used to move loads. The mechanical advantage depends on the ratio of the wheel's radius to the axle's radius. Inclined Plane: An inclined plane is a flat surface that is sloped. By sliding an object along the inclined plane, you can exert a smaller force over a longer distance to move the object to a higher or lower elevation. This reduces the force required to lift the object vertically. Wedge: A wedge is a double-inclined plane used to split or separate objects. When you apply force to the thick end of the wedge, it generates a large force at the thin end, making it useful for cutting, splitting, or prying. Screw: A screw is an inclined plane wrapped around a cylindrical shaft. When you rotate the screw, it moves along its threads and can lift or hold objects. Screws provide both a mechanical advantage and a way to generate motion over a distance.
What are the advantages of aerial lift over mechanical lift?
Ariel lift is considered a mechanical device. It is used to provide temporary access for people or equipment to inaccessible areas.
Which is the most usefull software for mechanical engineer?
There are many but the best suited are those on which you can perform CAD-CAM... many software do provide that facility ......
What is a power-driven machinery?
It's any sort of machine that uses petrol/gasoline or diesel or steam or electricity to provide its energy rather than animals or human beings. Usually this term applies to industrial machines in factories or on farms or in similar places.
What is a linear actuator?
A linear actuator is an actuator that creates motion in a straight line, as contrasted with circular motion of a conventional electric motor. Linear actuators are used in machine tools and industrial machinery, in computer peripherals such as disk drives and printers, in valves and dampers, and in many other places where linear motion is required. Hydraulic or pneumatic cylinders inherently produce linear motion; many other mechanisms are used to provide a linear motion from a rotating motor?
Does a fixed pulley provide mechanical advantage?
yes
Explain why pulleys are in the lever family?
They provide mechanical advantage.
Can a pulley system provide both a directional advantage and mechanical advantage at the same time?
yes
What two things provide a mechanical advantage greater than one?
lever, gear train
Why does a fixed pulley provide only a mechanical advantage of 1?
Because it has a low input force
How is the mechanical advantage of a movable pulley determined?
The method to calculate mechanical advantage is easy to remember and is necessary when rigging the assembly to accomplish the job. The mechanical advantage of a rigging that will require upward pull can be determined by counting the number of rope lengths running between engaged pulleys and those doing the work. Likewise, if the assembly will require downward pull, count the ropes and subtract one to get the mechanical advantage number. The subtraction is necessary because with the fixed pulley, the downward pull equals the load on the other length of rope so the last "pull" rope does not provide any mechanical advantage.
What is a block and tackle used for?
Block and tackle refers to a rope threaded through a series of pulleys to provide mechanical advantage, and it is used to lift heavy objects,
What kind of simple machine is nut and bolt?
They are types of screws which are actually inclined planes that curve around the outside of a rod and the interior of a cylinder. Instead of anchoring into a surface, a bolt passes through a hole and is locked in place by the nut. At its most basic, it is an inclined plane. That inclined plane formed by the threads of the bolt is wrapped around an axle and the nut provides a mechanical advantage by being a lever (The force arm is the nut's radius). The lever can be extended (a wrench) to provide greater mechanical advantage.
Which is not a way that machines provide a mechanical advantage?
If you want me to pick the correct answer from a list of multiple choices for you, I'd appreciate it if you could give me a peek at the list for a few seconds.
What are wrenches?
A wrench is a tool used to provide grip and mechanical advantage in applying torque to turn objects-usually rotary fasteners, such as nuts and bolts-or keep them from turning.
What the advantage for an operating system designer of using a virtual machine?
A virtual machine will provide generic hardware that can be found in many other computers. Having a virtual machine eliminates the need to have either a second system, or to reboot to test their operating system.
Why does a fixed pulley provide only a mechanical advantage of 1 how does this type of pulley affect the force?
wiki answers does not yet have an answer to this question. If you know it feel free to submit your answer here
