Want this question answered?
A 3-phase motor probably has some scrap value to a scrap-metal dealer.
i have a metal sleeve over each spark plug wire at the motor.....cant get the wire out to get to the plugs?? how do i get the wire off the plug??
The symbol for MOTOR is the circle with an M in it.Hoped I helped :)
A hair clipper is nothing more than an electric motor with a cutting blade attached to it. The motor shaft is usually connected to the blade in a fashion that moves it side to side. One way to do that is by connecting the motor shaft to a wheel, cam, or rod that changes the rotational motion of the shaft to the desired motion of the blade: side to side, up and down, etc. The method commonly used is an eccentric ( a cam lobe ) connected to the motor shaft. The eccentric is then placed into or onto the cutting blade which moves in a guide. If you look close while a hair clipper is running, you can see that the motion of the blade. It moves slightly up and down as well as the desired side to side motion. That is a result of the offset of the eccentric from dead center of the motor shaft as it makes a revolution.
You need to contact the South Carolina Department of Motor Vehicles. It may or may not be public information. If it isn't, it'll require a court order to obtain that information.
Cutting light gauge metal. I've seen these in 3 foot and 4 foot widths. Slip the metal under the blade and jump down on the bar. Some have been adapted with an electric motor.
gas is not going to the motor
220 or 240 v. The larger motor required can run more efficiently on 220/240, and produce more power under large loads.
It's the motor in the lawn mower.
It's a saw for cutting materials, it has a vertical blade and a motor moves the blade up and down cutting through materials, it is able to make very tight turns when cutting.
If you have imagination,cutting torch,and a welder.
What do you think? Aluminum you DOOFUS!!
Old as the hills!
15 to life
You would need to contact the NCDMV (North Carolina Department of Motor Vehicles). They have offices in almost every town and city in North Carolina.
A load on motor cutting high grass to short.
Well with my research the former popular Lowe's Motor Speedway is now called the Charlotte Motor Speedway. The Charlotte Motor Speedway is located in North Carolina.