well 1 dam is 10 meters, which is 1000 cm. so 1000 x the # of dam- which in this case is 99. so the answer is 99000.
gud luck...
10mm in one cm, 2.5 cm = one inch...so between 3 or 4 Direct Conversion Formula97 mm* 1 in 25.4 mm = 3.818897638 in
Divide by 25.4 for metric to imperial. Multiply by 25.4 for imperial to metric. Direct Conversion Formula7.64 mm* 1 in 25.4 mm = 0.3007874016 in
Not sure about your question but 25.4 is a standard metric to English conversion of mm to inches. 25.4 mm = 1.00 in.
0.0065 dam, algebraic steps below: 65 mm*1 dam 10000 mm=0.0065 dam
No
There are conversion factors. Within the customary system, with common units, you use12 inches (in) = 1 foot (ft)36 in = 3 ft = 1 yard (yd)792 in = 66 ft = 22 yds = 1 chain7920 in = 660 ft = 220 yds = 10 chains = 1 furlong63360 in = 5280 ft = 1760 yds = 80 chains = 8 furlongs = 1 mile (mi).Within the metric system10 millimetre (mm) = 1 centimetre (cm)100 mm = 10 cm = 1 decimetre (dm)1,000 mm = 100 cm = 10 dm = 1 metre (m)10,000 mm = 1,000 cm = 100 dm = 10 m = 1 decametre (dam)100,000 mm = 10,000 cm = 1,000 dm = 100 m = 10 dam = 1 hectometre (hm)1,000,000 mm = 100,000 cm = 10,000 dm = 1,000 m = 100 dam = 10 hm = 1 kilometre (km).To convert from a smaller unit to a larger one (left to right) you divide by the conversion factor.In both cases there are smaller and larger units. In the case of the customary system they basic unit-to-next unit conversion often requires yet another conversion factor. In the metric system, the conversion factor is 1,000.
You can find sizes that are close, but metric bolts require metric nuts. Metric bolts should be available from some or most of the same suppliers of non-metric bolts - but selection at a big box store may be limited. If you are just interested in sizes, such as 6 mm is close to 1/4 inch, that's just length conversion, mm to fractional inches. Nuts & bolts on bicycles, imported cars, and at least some US cars are metric.
It is 16 mm, whether or not in the metric system!
The deca- (da) prefix means 10, thus: 10 dam = 10 x 10 m = 100 m = 1 hm (1 hectometre) = 0.1 km = 1000 dm (decimetre) = 10000 cm = 100000 mm With appropriate multiplication/division, other metric prefixes can be used, eg 10 dam = 0.0001 Mm (mega metres) = 100000000 µm (micro metres), etc.
A millimeter is normally the smallest division on a metric rule, one tenth of a centimeter, one thousand to a meter (and hopefully you are not looking at a non-metric ruler).
4.33070866 Direct Conversion Formula 110 mm* 1 in 25.4 mm = 4.330708661 in
Yes a millimeter is smaller than a centimeter according to the mathematics metric scale the following comes in ascending order - MM (millimeter) CM (centimeter) DM (decimeter) M (meter) DAM (decameter) HM (hectometer) KM (kilometer)