Want this question answered?
House pressure, 75 PSI maximum.
How high is the building and what are the GPM /PSI requirements of the fixtures
1000000 ml
To correct the pressure in water pipes, you can adjust the pressure regulator valve. Locate the pressure regulator valve, which is typically found near the main water line or near the water meter. Using a wrench, turn the adjusting screw clockwise to increase the pressure or counterclockwise to decrease it. Be cautious not to exceed the maximum recommended pressure for your plumbing system.
most plumbing codes require 10' of head for testing purposes. Maximum head pressure would depend on pressure rating of pipe & fittings used.
pressure reducing valve is required.
Any maximum flow shower head will give maximum effect with minimum water usage.
There is no lower limit but absolute zero. At 1800 K water begins to come apart into 2H and O, dependent on pressure and temp.
There isn't a maximum or minimum height you need to be.
Optimal household water pressure should be between 40 psi - 80 psi. If water is supplied by public water usually they supply the minimum pressure. If you have more than 80 psi, a pressure reducer is recommended.
The pump and holding tank regulates the minimum and maximum pressure on the lines. See the pressure gauges. Usually, the pump will kick in at around 25 psi, and kick out at 55 psi. Depends how yours is set up.
At the bottom of a waterfall.
House pressure, 75 PSI maximum.
My guess is that the hot water heater is installed downstream from a pressure reducer to limit the maximum water pressure that the water heater is exposed to.
50 psi
a human needs 8 to12 glasses in a day .
Blood pressure is usually expressed in terms of the systolic (maximum) pressure over diastolic (minimum) pressure and is measured in millimeters of Mercury (mm Hg).