160 feet
It depends on: Traffic volume, design speed, Running speed, capacity of lane, and percentage of truckd
The Interstate Highway standards for the U.S. Interstate Highway System uses a 12-foot standard for lane width.
Malaysia minimum lane width is 2.75 meter according to JKR U2 and this width only applicable for local streets lane they have pavement roads.
The width of one lane for a two-lane highway (one lane each way) is at least 3.75 m (12.3 feet).For four-lane highways, the width of each lane, excluding shoulders, is at least 3.5 m (11.5 feet)
The standard width for a US two-lane highway is 30 feet. The driving lanes are 12 feet wide in both directions. The shoulders are three feet on each side.
13 to 14 meters or 43 feet to 47feet
It depends upon the lanes: Two lane road (one lane each way) - at least 7.5 m (24.6 feet), which is one 3.75 m lane (12.3 ft)each way More than two lanes: - 3.5 m per lane e.g. 4 lane highways have two 3.5 m lanes in each direction, for a total width of at least 14 meters.
The standard with of a highway road link is dependent upon the type of Highway. Interstate highways have a standard with of 14 feet
In width, the plainest 2-lane highway is almost 1,000 centimeters, not counting the shoulders. In length, any highway can be as many as you want.
Alaska does not have an interstate highway as an interstate highway requires 4 lane divided road connected at the very minimum state. Alaska is separated from the 48 other states. Thus can not have an interstate highway. Alaska has state highways and it has national scenic routes but are not able to have an interstate highway.
Bandwidth is a way of measuring how much data can travel along a certain path in a network. It is much like a highway or road; an 8 lane highway can handle twice as much 'traffic' (or page views) as a 4 lane highway.
10 to 12 seconds