30,000,000 psi (207 GPa)
200 GPa
Yes you can use. The Chemical and Mechanical properties are similar.
The raw steel specification A36, has a maximum tensile strength of 80 ksi. This is the same maximum strength as ASTM standards like A307 grade C or F1554 grade 36. I'm not familiar with any other specifications that would use A36 and have a higher maximum strength. The A36 steel would be out of tolerance if it exceeds a 80 ksi tensile. Being out of tolerance in this way could indicate other properties are also out of tolerance in a less favorable way. The steel would be less ductile, for instance, and impact properties might be reduced.
The 36 stands for the yield strength in ksi Fty = 36 ksi = 36,000 psi
What is equivalent to IS 2062 Grade A, IS 1239, EN-8, BS970, IS 1367 CL.4.6, IS 1875 CL.II to ASTM std?
Carburize (Materials) BS 4360 43C is a structural grade like ASTM A 36 but with guranteed charpy properties:C .19 max, Si .5 max, Mn 1.5 maxUTS 62,400 psiYield Strength depends on thickness but up to 1.5-inch would be 35,000 psiCharpy impact tested at 0 degrees C (-32 Degrees F)minimum average impact toughness 27 J (20 ft lb)
Astm a-36
Did you mean A36 steel? As with most steels, A36 has a density of 7,800 kg/m3 (0.28 lb/cu in). Young's modulus for A36 steel is 200 GPa (29,000,000 psi). A36 steel has a Poisson's ratio of 0.32, and a shear modulus of 78 GPa (11,300,000 psi)
ASTM A307 Grade B
Yes you can use. The Chemical and Mechanical properties are similar.
Only if you do math modulus 36 - or some other non-standard definition.
The raw steel specification A36, has a maximum tensile strength of 80 ksi. This is the same maximum strength as ASTM standards like A307 grade C or F1554 grade 36. I'm not familiar with any other specifications that would use A36 and have a higher maximum strength. The A36 steel would be out of tolerance if it exceeds a 80 ksi tensile. Being out of tolerance in this way could indicate other properties are also out of tolerance in a less favorable way. The steel would be less ductile, for instance, and impact properties might be reduced.
The sixth gim leeder, Byron has a LV.36 Bronzor(steel/psycic), LV. 36 Steelix(steel/ground), and a LV. 39 Bastidon.(rock/steel)
The 36 stands for the yield strength in ksi Fty = 36 ksi = 36,000 psi
Around 80
EH 36
Prinplup evolves into Empoleon at Level 36. Its type is Water and Steel!
Bronzor - Gender: Unknown - Level 36 - Type: Steel and Phychic. Steelix - Gender: Male - Level 36 - Type: Steel and Ground Bastidon - Gender: Male - Level 39 - Type: Rock and Steel.