0
UTP most commonly used network cable
Cat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
What else can I help you with?
What is an RJ45 Connector used for?
An RJ-45 connector is the the connector at the end of a Cat-# cable (also known as a lan cable/network cable).
Name of a cable connector that would be used if the cable was coaxial?
BNC connector
What is the most common type connector used with coaxial cable on a ThinNet internet network?
BNC Connector
What is the most common type connector used with coaxial cable on a ThinNet Ethernet network?
BNC
What connector used with a thin coaxial cable?
A thin coaxial cable that is used as a connector is also called a thinnet. It is popular in linear bus networks.
What is the name of the connector used on a network cable?
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
What is the most common type connector used with coaxial cable on at ThinNet Ethernet network?
BNC connecter
Which connector is used for utp cabling on a network?
The media connector between the NIC and the UTP cable is a RJ-45 Internetworking with Cisco and Microsoft pg. 229
What is the name of the connector used on a network?
UTP most commonly used network cableCat 5 and Cat 6 network cables (also called 10BaseT) use an RJ-45 connector. Older thinwire ethernet (10Base2) uses BNC coaxial connect. Original thickwire ethernet used a special thicker cable with a proprietary AUI connector. The old IBM Token Ring system also used its own special cabling and connectors.
What registered jack is used to terminate the standard network patch cable?
The standard network patch cable is typically terminated using an 8P8C connector, commonly referred to as an RJ45 connector. This connector has eight positions and contacts, which accommodate the eight wires in a Category 5 (Cat5), Category 5e (Cat5e), or Category 6 (Cat6) cable. The wiring can follow either the T568A or T568B standard, which dictate the arrangement of the color-coded wires within the connector.
Which connector do you use in LAN network?
the popular connector used in lan network is RJ45
What is the common term used to describe an 8p8c network cable connector?
The most popular connectors found these days on the ends of network cables are commonly called RJ45 connectors.
