Nbtstat is designed to help troubleshoot NetBIOS name resolution problems. When a network is functioning normally, NetBIOS over TCP/IP (NetBT) resolves NetBIOS names to IP addresses. It does this through several options for NetBIOS name resolution, including local cache lookup, WINS server query, broadcast, LMHOSTS lookup, Hosts lookup, and DNS server query.
The nbtstat command removes and corrects preloaded entries using a number of case-sensitive switches. The nbtstat - a <name > command performs a NetBIOS adapter status command on the computer name specified by < name> . The adapter status command returns the local NetBIOS name table for that computer as well as the MAC address of the adapter card. The nbtstat -A < IP address > command performs the same function using a target IP address rather than a name.
The nbtstat - c option shows the contents of the NetBIOS name cache, which contains NetBIOS name-to-IP address mappings.
nbtstat -n displays the names that have been registered locally on the system by NetBIOS applications such as the server and redirector.
The nbtstat -r command displays the count of all NetBIOS names resolved by broadcast and by querying a WINS server. The nbtstat -R command purges the name cache and reloads all #PRE entries from the LMHOSTS file. #PRE entries are the LMHOSTS name entries that are preloaded into the cache. For more information about the LMHOSTS file, see the appendix "LMHOSTS Files" in this book.
Nbtstat -RR sends name release packets to the WINS server and starts a refresh, thus re-registering all names with the name server without having to reboot. This is a new option in Windows NT 4.0 with Service Pack 4 as well as in Windows 2000.
You can use nbtstat -S to list the current NetBIOS sessions and their status, including statistics. Sample output looks like this:
C:\>nbtstat -S
Local Area Connection:
Node IpAddress: [172.16.0.142] Scope Id: []
NetBIOS Connection Table
Local Name State In/Out Remote Host Input Output
------------------------------------------------------------------
TESTPC1 <00> Connected Out 172.16.210.25 6MB 5MB
TESTPC1 <00> Connected Out 172.16.3.1 108KB 116KB
TESTPC1 <00> Connected Out 172.16.3.20 299KB 19KB
TESTPC1 <00> Connected Out 172.16.3.4 324KB 19KB
TESTPC1 <03> Listening
Finally, nbtstat -s provides a similar set of session listings, but provides the remote computer names, rather than their IP addresses.
You could try with the nbtstat command in the command prompt. You should type: nbtstat -A [machinename] or [IP address]
1.Nbtstat -r. Hope you pass mr Chinedum's class
Nbtstat is designed to help troubleshoot NetBIOS name resolution problems. When a network is functioning normally, NetBIOS over TCP/IP (NetBT) resolves NetBIOS names to IP addresses. It does this through several options for NetBIOS name resolution, including local cache lookup, WINS server query, broadcast, LMHOSTS lookup, Hosts lookup, and DNS server query.The nbtstat command removes and corrects preloaded entries using a number of case-sensitive switches. The nbtstat - a command performs a NetBIOS adapter status command on the computer name specified by < name> . The adapter status command returns the local NetBIOS name table for that computer as well as the MAC address of the adapter card. The nbtstat -A < IP address > command performs the same function using a target IP address rather than a name.The nbtstat - c option shows the contents of the NetBIOS name cache, which contains NetBIOS name-to-IP address mappings.nbtstat -n displays the names that have been registered locally on the system by NetBIOS applications such as the server and redirector.The nbtstat -r command displays the count of all NetBIOS names resolved by broadcast and by querying a WINS server. The nbtstat -R command purges the name cache and reloads all #PRE entries from the LMHOSTS file. #PRE entries are the LMHOSTS name entries that are preloaded into the cache. For more information about the LMHOSTS file, see the appendix "LMHOSTS Files" in this book.Nbtstat -RR sends name release packets to the WINS server and starts a refresh, thus re-registering all names with the name server without having to reboot. This is a new option in Windows NT 4.0 with Service Pack 4 as well as in Windows 2000.You can use nbtstat -S to list the current NetBIOS sessions and their status, including statistics. Sample output looks like this:C:\>nbtstat -SLocal Area Connection:Node IpAddress: [172.16.0.142] Scope Id: []NetBIOS Connection TableLocal Name State In/Out Remote Host Input Output------------------------------------------------------------------TESTPC1 Connected Out 172.16.210.25 6MB 5MBTESTPC1 Connected Out 172.16.3.1 108KB 116KBTESTPC1 Connected Out 172.16.3.20 299KB 19KBTESTPC1 Connected Out 172.16.3.4 324KB 19KBTESTPC1 ListeningFinally, nbtstat -s provides a similar set of session listings, but provides the remote computer names, rather than their IP addresses.
nbtstat
netbios is built in application in dos command mode we can use netbios in command mode. Its a default in every system that is installed with xp using netbios we can see the types of protocols used types and ip addresses of currently using servers we can also trace out ip addresses of th e servers that are connected with our servers we can also remotely work with other computers using netbios command mode some of the commands are netstat, nbtstat, tracer (posted by earningsmugglers@gmail.com)
Explore few of the commands like Netstat &Nbtstat for Network Connections, Netsh for Firewall, Diskpart for Storage in Windows Server 2008.
divine command is command given by God
Go to the Command prompt and run "help" command to see the command list..
The 'type' command does approximately (but not exactly) the same thing as the 'cat' command.
Command+p
The Del or Erase command in command prompt.
The "clc" command is used to clear the command window in Matlab.