# What is the no-load voltage of a power supply that produces 24 volts at full load with a percent regulation of 10?

the voltage regulation (as a percent) = |V(no-load) -V(rated)|/|V(rated)| * 100

so if V(rated) = 24 V

voltage regulation =10%

then V(no-load) = 26.4 V

### What are some of the applications of shunt motors?

1. D.C Shunt Motors:It is a constant speed motor.Where the speed is required to remain almost constant from noload to full load.Where the load has to be driven at a number of speeds and any one of which is nearly constant. Industrial use: Lathes Drills Boring mills Shapers Spinning and Weaving machines. 2. D.CSeries motor: It is a variable speed motor.The speed is low at high torque.At light or no load ,the motor speed attains…

### What are applications of DC motors?

1. D.C Shunt Motors: It is a constant speed motor.Where the speed is required to remain almost constant from noload to full load.Where the load has to be driven at a number of speeds and any one of which is nearly constant. Industrial use: Lathes Drills Boring mills Shapers Spinning and Weaving machines. 2. D.CSeries motor: It is a variable speed motor.The speed is low at high Page on torque at light or no load…

### Define voltage regulation and efficiency of a short transmission line?

Voltage Regulation voltage regulation of a line is defined as the change in voltage at the receiving end when full load at a given power factor is removed, the voltage at the sending end being kept constant. it is expressed as a fraction or a percentage of the receiving end voltage at full load. it can be written as, Per unit regulation = Vrnl - Vrfl / Vrfl Percent regulation = (Vrnl - Vrfl /…

### Voltage regulation of transformer?

Transformers don't do voltage regulation they do voltage conversion. So you need something else to do the regulation because it can only multiply an (AC) voltage by some predetermined constant. So if they input voltage is not stable, then neither will the output. Answer A transformer's voltage regulation is defined as 'the variation of secondary voltage, from no-load to full-load, expressed either as a per-unit or percentage of its no-load voltage'. In other words: voltage…

### What is regulation of a transmission line?

Regulation has to do with keeping the voltage at a desired value. This is often put in a per unit value, which you can think of as a percent of nominal. So if the desired voltage is 34.5kV, and the actual voltage is 33.8kV, the voltage is .98 per unit. There are regional and national rules on how low or high voltage can be. If the voltage strayes from this, it must be regulated back…

### What is meant by voltage regulation of transformer?

Voltage regulation is the percent change in output voltage from no load to full load. There is a natural voltage drop internal to a transformer due to the resistance of the copper windings. As more current passes through, more voltage will be dropped across these windings. This results in an uneven voltage output that is dependent upon the current passing through the transformer.

### What is the significance of voltage regulation of transformer?

Voltage regulation of a transformer depends mainly on the leakage Reactance it offers.Distribution transformers are subjected to load dynamics frequently,therefore they have to be designed with good voltage regulation if the same is not done then throwing off a large load may lead to severe voltage increase which affect the already connected load, so as to keep voltage under tolerable limits a transformer with good voltage regulation should be designed. Voltage regulation is a very…

### What do you understand by regulation in a transformer?

Regulation of transformer means percentage reduction of transformer secondary voltage due to transformer loading as compared to its no load voltage. Another Answer A transformer's voltage regulation is defined as 'the change in its secondary voltage, from no-load to full-load, at a specified power factor, expressed as a percentage of its full-load voltage, with the primary supply voltage held constant'.