0
What else can I help you with?
What an ohmmeter measures?
resistance to current flowAn ohmmeter meassures resistance
Is a ohmmeter a pressure gauge?
No. An Ohmmeter measures electrical resistance to the flow of current.
What is the configuration of the ohmmeter?
An ohmmeter is connected in parallel to a resistor. Be sure that there is no power in the circuit when testing.
Should the ohmmeter be connected to the circuit while the power is being applied or only when the circuit is turned off?
Turn off the supply before using the ohmmeter,it will damaged your ohmmeter when supply is present.
What is ohmmeter?
An ohmmeter is a type of electrical metre that measures electrical resistance. When in resistance-measuring mode, multimeters also operate as ohmmeters. An ohmmeter measures the resistance of a circuit or component by passing electricity through it.
How do you test blower motor resistor on a 1994 Toyota pick-up?
Remove and test with an ohmmeter Explain how to test with an ohmmeter?
When measuring resistance with an ohmmeter?
Yes.
What is the function Ohmmeter?
What is the function of rheostat
What should the ohmmeter read when the lead probes are touched together?
When the lead probes of an ohmmeter are touched together, the ohmmeter should read close to zero ohms, indicating a short circuit or very low resistance between the probes.
What are two familiar mistakes when using an ohmmeter and a voltmeter?
Voltmeter connect in parallel with the circuit setting on voltmeter highest range first then to lower range. Ohmmeter we need to use the ohmmeter meter setting connect across the resistor
What kind of meter uses its own battery?
A. ohmmeter B. voltmeter C. ammeter D. wattmeter
What precuation must be taken when using an ohmmeter?
Be certain the circuit is de-energized and discharged before connecting an ohmmeter.Do not apply power to a circuit while measuring resistance.When you are finished using an ohmmeter, switch it to the OFF position if one is provided and remove the leads from the meter.Always adjust the ohmmeter for 0 (or ∞ in shunt ohmmeter) after you change ranges before making the resistance measurement.
