There are 2 2.8L engines. A 5 cylinder and a 6 cylinder. for the 5 cylinger it's either 5 or 6. Start with 5 and add as needed. For the 6 cylinder its 4.5qts
28 litres, any other info needed just ask
For a 2002 Ford Focus : The 2.0 liter SPI engine uses Motorcraft ( FL-400-S ) oil filter ( MSRP/list is $7.22 U.S. ) The 2.0 liter Zetec engine uses Motorcraft ( FL-2005 ) oil filter ( MSRP/list is $7.22 U.S. ( as of May 28 , 2011 )
7 gallons (28 quarts)
5 quatrs
Fuel 16.9 gal. Engine oil capacity 4.8 qt. w/filter Coolant capacity Manual 7.3 qt. Automatic 7.2 qt. Trans. oil capacity Manual 3.7 qt. Automatic 9.8 qt. Towing capacity 2,000 lbs. (Class 1) Fuel Efficiency (city / highway) 5-speed manual 21 / 27 4-speed automatic 22 / 28 (22 / 29 - Sedan)
The Intek & Power Built vertical shaft 11.5 h.p. engines total capacity is 48 ounces. Drain the oil and add 40 ounces unless it has an oil filter, which in that case add 4 more ounces. Start the engine and let run for 30 seconds. Shut down, wait 30 minutes, and check the oil level on the dipstick. Add as necessary to reach the full mark. Do not add 48 ounces in the beginning as some of the oil will be left in the oil sump. Do not overfill.The horizontal shaft engine total capacity is 28, 32, or 48 depending on the exact model. The Clean Tek is 28 ounces, the Vanguard is 32 ounces, and the I/C Plus is 48 ounces.Any engine equipped with an oil filter add 4 more ounces to the capacity.
.28 to .31
• Approximate "maximum" oil pan capacity is 29.6 quarts (28 liters). • Approximate "minimum" oil pan capacity is 24.3 quarts (23 liters).
The 1995 Mitsubishi Mirage 1.5-liter MFI SOHC 4-cylinder engine uses R-134a refrigerant. The refrigerant capacity for this make and model is 28 ounces.
3 is the series of the car 28 is the engine cubic capacity, 2800cc or 2.8Ltrs i means it is a fuel injected engine.
35-40 psi while engine is off. 28- 35 psi at engine idle. -jonny b.
2002 1500 Chevy Suburban. w/5.3 liter engine takes 3.0 lbs of R134A. Ok lets kill 2 birds with one stone (dual)46 oz and 11 0z of pag 46 oil, the (single) unit takes 28 oz and 8 oz of pag 46 oil Jay the pool pump repair guy in longwood Florida