0
What else can I help you with?
What is the opposite of a razor blade?
Ice Cream.
What is a blade flipper?
A blade flipper is a knob at the back of a knife that you flick down and it opens the knife example kershaw skyline line usally opposite from the blade
What is a drop blade knife?
A drop point blade has a convex curve of the back, the opposite side of the cutting edge, towards the point.
Which direction do you turn nut to remove saw blade on a 10inchtractor ryobi table saw?
any saw is the opposite of the way the blade spins!
What is an reverse blade sword?
The sharp side is opposite where you would normally expect it, while the normal cutting side, is the wide unsharpened portion of the blade.
Which way do you turn the bolt to remove the blade on a toro 36 inch walk behind mower?
The opposite direction that the blade rotates. In this case I would say counter clockwise but their should be a marking somewhere on the mower that shows blade rotation direction.
How do you translate the phrase Darkness Blade to Japanese and how do you pronounce it?
Literally translated, light blade would be 'hikari no katana,' written:　光の刀 I would suggest that instead of "dark blade," you go with "shadow blade/blade of shadows," as not only does it sound better than the literal translation of "dark blade," but also stands better as an opposite to a "blade of light." That would be 'kage no katana,' written: 影の刀
How do you maintain a plate joiner?
You begin by removing the blade from the plate joiner while wearing gloves. Soak the blade with a cleaner spray and allow it to sit for a few minutes. Afterwards, use a cloth to wipe the blade in a circular motion. Repeat for the opposite side. Perform a final inspection to ensure that the blade is completely clean and free of debris. If the blade is still dull and dirty, it may need to be replaced.
How do you change blade in challenge mitre saw?
They usually have a pin or locking knob, you either push it in or hold it in while you loosen the blade retaining nut, some you might have to remove the shield or guard, older saws might not have this feature at all, place a piece of wood on the bed of the saw and hold down so the blade digs into the wood and loosen the nut.
Does the manufacturing logo on a circular saw blade always face out toward you?
Depends on the manufacturer and if the saw is left or right handed. Normally a saw cuts UP rotating in the opposite direction a wheel would. Click the saw on, without a blade in to see which way the motor turns then put the blade in to cut in that direction.
The rotor blade on the side of the helicopter that moving in the opposite direction?
The tail rotor is moving "perpendicular" to the main rotor, not "opposite". The tail rotor creates thrust opposite to the thrust of the main rotor, to keep the fuselage from spinning. Most helicopters spin the main rotor counter-clockwise looking from above, which puts a clockwise rotation on the fuselage. You need a tail rotor pushing the tail counter-clockwise to keep the fuselage pointed in the direction the pilot chooses.
How are leaves used as a means to identifying plants?
These things are considered: the shape of the leaves the margin of the leaves - serrated how the leaves are arranged on the stem - alternate, opposite etc if the leaves have hairs how the leaf blade is divided (or not) what the leaf stem is like what the veins of the leaf blade are arranged
