Want this question answered?
From centimeter to meter, you move the decimal one place to the right, and vice versa.
The tighter the coil, the higher the EM field; however, the more surface area of the coil the more EM you will be able to generate. An easy way to under stand this is with the transformer. This device takes one type of energy and converts it to another by use of two coils of different size. A smaller coil with the power souce will transfer power to a larger coil and convert the power to a higher voltage, but at a lower amperage and vice versa. Try looking for books at your local library that deal with electromagnetic coils.
The tighter the coil, the higher the EM field; however, the more surface area of the coil the more EM you will be able to generate. An easy way to under stand this is with the transformer. This device takes one type of energy and converts it to another by use of two coils of different size. A smaller coil with the power souce will transfer power to a larger coil and convert the power to a higher voltage, but at a lower amperage and vice versa. Try looking for books at your local library that deal with electromagnetic coils.
Flow rate is volume of liqid flowing per unit time, velocity is displacement per unit time. For a constant cross-section area, the flow rate would increase with velocity and vice versa. This is because the volume flowing per unit time obviously increases if distance covered by the fluid increases. Picture a fluid flowing through a cylindrical pipe.
The higher the density the lower the volume and vice versa. Density is defined as mass per unit volume. Therefore, density is directly proportional to mas of the object and inversely proportional to the volume of the object. Therefore, as volume increases , density decreases and vice versa.
I would contact the local police department's vice unit, if they don't handle gambling they will be able todirect you to the right squad.
Vice admiralty courts were juryless courts located in British colonies that were granted jurisdiction over local legal matters related to maritime activities, such as disputes between merchants and seamen.
the vote of the vice president will break a tie
The power that is vested in the President and the Vice President is called executive power. This power is expected to be exercised according to the constitution.
Yes.
The Vice President's power over the senate is only to break a tie and to run the senate meeting.
The president has 100% veto power and can shut down anything.The vice president has 3/4 veto power. A vice presidential veto can be overridden by a 75% vote of the house or senate.
No
Probably. There's a legal method called "pro hac vice" that permits a lawyer that's not licensed to practice in a jurisdiction to participate in a specific matter in that jurisdiction.
It depends on whether or not the power steering pulley is a bolt on or a press on. If it is a bolt on, simply place the bottom side of the power steering pump in a vice and unbolt it. If you have to pull it off (press on) pray you have aforementioned vice. You will need to go down to your local auto parts store and see if they rent out press on pulley removers. Pretty expensive if you have to purchase it. You complete this the easy way, unbolt the slip tightening bolt to loosen the fan belts up. Then unbolt the rest of the unit, detach your intake and output tubes for the power steering fluid, then if you want to not have to bleed the system, crimp both tubes BEFORE you remove it. Then place the entire unit in the bottom and use the pulley remover. It is in two pieces and goes on either side of the top groove of the pulley in the center. Then a screw-on unit goes on top and you just twist and it pushes the main unit down until...pop...then your done.
Yes a president can relinquish his power to the vice president for personal or medical reasons. The term for this is known as relinquishment of power to the vice president.
The Vice President of the United States is the President of the Senate, with the power to break tie votes.