0
The power rating of the bulb indicates how much power it uses. The power in watts indicates how much energy in Joules the bulb uses in one second.
A bulb should have its voltage and power printed on it.
What else can I help you with?
Can you use 24 volt transformer to powers 12v lights?
You can if you want to connect two 12 volt lights in series with each other. Make sure that the 12 volt lights are rated for AC and not DC.CommentFurther to the above answer, you must also ensure that the two lamps have identical power ratings, or the lamp with the lower power rating will be brighter than the one with the higher power rating!
How long do you have to leave you car lights on before the battery goes flat?
There is not set amount of time. It would depend on such factors as the power drawn by the lights, the rating and condition of the battery and the temperature.
What is power rating of transistor?
what is the power rating of a transister
What does the power rating of an appliance mean?
what is the power rating of energy
How many kva to run four street lights?
To determine the required kVA to run four street lights, you will need to know the power rating of each street light. Once you have that information, you can add up the power ratings of the four street lights to calculate the total power consumption in watts. Finally, divide the total wattage by 1000 to convert it to kilovolt-amperes (kVA).
What is the power rating in a Nintendo 3ds?
The power rating is on the bottom of the 3ds, the power rating is 4.6V 4.1W, the power suply input is 4.6V 900mA. the DSI charger will work on a 3DS.
What is the power rating of a laptop?
Every laptop has a different power rating.
How do the car lights get power?
Car lights get power from the batterie in the car, or in some cars oil gives car lights power.
How does temperature affect power rating of carbon resistors?
Its normal power rating is at room temperature. For a temperature of 75 degrees, halve the rating.
What is maximum power rating?
Maximum power rating describes the maximum power at which a device can operate without reaching an excessive temperature. For example, in the case of a resistor, if its maximum power rating is exceeded, then it may burn out.
What is a power rating?
A power rating is the amount of power a device consumes when operating at full capacity. Typical power ratings of ATX power supplies are 350W, 400W and 500W.
What is the power rating for a 10amp dc load?
It depends on the voltage rating.
