do not tilt the micropipette, otherwise the solution will go inside of it and it is difficult to take out
the precaution to see that air bubbles are not present
pipette filler
A pipette bulb is the rounded part of a pipette which you squeeze the air out of, then release to draw liquid into the pipette. If you are using a calibrated glass pipette, it will be a separate piece made of rubber which is fitted to the pipette. If it is a simple plastic pipette then the bulb will be made of the same semi-transparent plastic, and the pipette will all be one piece.
The pipette is used to draw up fluids, some like using a straw.
A pipette bulb allow a liquid to be sucked up into the pipette, so avoiding having to use your mouth to suck the liquid up. Apart from avoiding often toxic liquids getting into your mouth, it also avoids contamination of the liquid.
A Pasteur pipette is basically an eye dropper. It is used to collect liquids, to be utilized for different purposes.
There are many types of pipettes (or pipet), but most are essentially a fancier version of a medicine dropper or eye dropper. They are used in a laboratory to transport and/or measure a specific volume of liquid.Volumetric pipettes allow the user to measure a volume of solution extremely accurately and then add it so something else. They are commonly used to make laboratory solutions from a base stock as well as prepare solutions for titration. They typically only allow you measure one single volume in a particular size pipette (just like with volumetric flasks). Therefore, they come in many different sizes.There are other types of pipettes also, such as a Pasteur pipette, which is not used to measure the volume of the liquid. It is essentially a large dropper, which can be used to remove liquid from one container and add it to another.There are also graduated pipettes, also called a Mohr pipette, which also allow you to measure the volume of the liquid in the pipette, although not as accurately as a volumetric pipette. These use a series of marked lines (as on a graduate cylinder) to indicate the different volumes. These also come in a variety of sizes. These are used much like a burette, in that the volume is found by calculating the difference of the liquid level before and after.All glass pipettes require the use of some kind of additional suction device, typically a pipette bulb (not the Eppendorf pipette or other similar ones, which have a built-in suction mechanism), which is a rubber bulb which sucks the liquid into the pipette and also allows you to drain the pipette in a controlled fashion. A Beral pipette is a one-piece pipette, usually made from flexible soft plastic (polyethylene) that has a built-in bulb on the end.See the Related Questions and Web Links to the left for pictures and more information on pipets and other laboratory equipment.*A piece of laboratory glassware, shaped like a thin tube with a bulge in the middle, that allows better accuracy when measuring certain volumes (hence the range of sizes) e.g. when making solutions or samples for titrations.Function of a pipette: to deliver small and exact volumes of liquids; extremely useful in chemical laboratories.
A pipette is used to accurately measure the volume of a liquid in the laboratory. In the school laboratory the pipette is usually a glass bulb with a glass tube on either end. There is a line on the tube to indicate how high to fill the pipette to measure the required volume.
A pipette bulb is the rounded part of a pipette which you squeeze the air out of, then release to draw liquid into the pipette. If you are using a calibrated glass pipette, it will be a separate piece made of rubber which is fitted to the pipette. If it is a simple plastic pipette then the bulb will be made of the same semi-transparent plastic, and the pipette will all be one piece.
I donno
To safely draw liquids into a pipette
A Mohr pipette is a type of pipette that measures the volume of dispensed liquids. It is less accurate compared to a volumetric pipette.
An absorption pipette is a glass apparatus used in the absorption of gases.
The rationale of the bead in the WBC pipette is for recognition. Through the white bead present inside the pipette it would be easy for a medical technologist to determine the pipette that should be used for differential counting. Aside from identification purposes, white bead is also used as a signal during the shaking procedure that would indicate that the components inside the pipet are mixed.
A pipette is essentially used to just suck liquids and to transfer it to something else. A pipette is like a syringe.
The pipette is used to draw up fluids, some like using a straw.
A pipette is a laboratory tool used to transport a measured volume of liquid.
The pipette is used to draw up fluids, some like using a straw.
The purpose of a volumetric pipette is to deliver a precise amount of a liquid. The label on the pipette indicates the volume delivered (e.g. 10.00 mL).