0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Sq ft price for exterior painting?
roughly $4 per sq...sanding if needed, caulk, 2 coats siding and 2 coats trim paint...including materials. NC area
How big is 400 sq ft house and any visual?
Here are some photos of my house, it is 380 sq ft. see below
How much does knockdown texture cost to put on a ceiling?
I just had a guy put up knockdown texture on the ceiling of practically my whole house. The house is about 1300 sq. ft., so taking out the bathrooms brings it down to maybe 1200 sq. ft.? He charged $1,100. However, this included taking down acoustical "popcorn" in the hallway, and patching the ceiling throughout the house, which had quite a few gouges and cracks when the old popcorn was removed. I still am convinced that I may have over paid, but whatever. I think if you have ceilings that are fully ready to go, it should cost you $500-$600 for about 1200 sq. ft. (that's my guess anyway) Basically $0.50 per sq. ft. It should only take the guy (with a helper if needed) about 2-3 hours. Sounds like this guy should have done it himself since he is so knowledgeable. Don't know why he would have called a professional, MORON!
What are the differences between Corel Draw and Photoshop?
corel draw is a vector based program used to make vector art. Adobes answer to corel draw is Adobe Illustrator. Corel is an older program, although still being produced, but not widely used because Adobe packages their programs. Adobe Photoshop is a pixel based program that uses small squares of color to make a picture. This is called the DPI (dots per inch). Vector programs dont work in DPI. Difference: You can make a vector art file as large as you want. A block of color is a block of color. You can take a 1 in by 1 in square and scale it to 1 ft by 1 ft and it will look exactly the same. In photoshop if you create a 1 in by 1 in square and scale it to 1 ft by 1 ft you get pixelation. Most logos are created as vector formats so they can be scaled to be small like a business card or large like on a billboard with no pixelation. You couldn't do that with a file created in photoshop. Biggest difference is artistic control. All the creative affects you see are done in photoshop. Corel doesnt have affects. But when you combine the powers of both you can have a nice looking billboard with a huge logo. hope this helps.
How much does it cost to get a tattoo?
depending on the size, colors, and where @, it could be anywhere between 45$ to 600$ or more.AnswerPrices vary on the size of the tattoo, the location of the tattoo and the artist. One shop's prices will vary from another's. But remember, you get what you pay for! The prices can be far greater than $600...The way that the artist prices the tattoo is: they look at the work involved in it. They look at how long it will take them to do the work, and then they price accordingly.AnswerIt all depends on what size, how many colors, and type you want. They can range from $74 to $500 even $600.It just depends on what you want and where you go to get it and if you want it as more then black and white.AnswerAs stated above it really does depend. In my personal opinion Ive noticed that established/well known artist will charge more for their work, than the 23yr. old who has just opened up shop and doesnt have a portfolio yet. When getting a tattoo Please,Please,Please shop around. Always ask the artist inking you for examples of his work.Do NOT let him point to the wall and show you pictures. You want to make sure he/she knows what their doing on skin. My first Tatt. cost about $30.00 with 6colors,Flash art & its 6"x21/2" in demensions.The color was breached and faded earley.My second tatt. was 4 colors & about the same size wich cost me over $80.00.13 years later it still looks as good as the one I got 2 years ago. My first tattoo had to be corrected. Never go shopping for price when it comes to tattoo's.Wait until you can afford to have one properly done. Just remember,"Good tattoo's arent cheap & Cheap tattoo's arent Good."'It depends on what you get, where on the body and the location of the tattoo parlor. You should do some research as to where you want you tattoo and the size and find a clean place to go because you wouldn't want anything to go wrong.'Answerit also depends on the shop's location, reputation, and if it is owner operated. for example, because my 2500 sq ft shop is located on a side street it costs only 800 a month compared to the 700 sq ft shop around the corner that rents for 1700 a month. plus because i do all the tattoos and own the shop, there is nobody taking a cut out of what i make. most shops pay their artists 30-50 percent, so they will charge 30-50 percent more than an owner/artist (fiqure that the owner/artist puts a maximum of 20% towards bills, taxes, and expenses) Also, most owner/artists care more about their long term rputation, so are more likely to help you choose a ttatoo you will be happy with, and take care of any touchups needed for free.Answerthe price I've almost always run across in my tattoo's(mind you this is in VA) are normally priced by the hour and normally about 80-100 dollars an hour. However, if it's a small flash tattoo or lettering it's normally one set price or you pay for letter.AnswerTattoo prices differ from area to are as mentioned above. In So-Cal tattoo's are going to be more expensive than say Beaver's Creek, Montana. The cost of living and the economy are huge factors. As well as the location within the city. In some small shop 100 miles from the coast it's alot chaper than a small shop on a shopping strip near the beach. The reputation of the artist/shop. A small time, new comer can't, better yet, shouldn't charge the same as a highly sought after tattoo artist with multiple magazine articles and a plethora of awards from national conventions. Size and location also determine the price. Tattoos on your hands, neck and face are more expensive than something on your shoulder or bicep. It puts alot of stress on the artist knowing that the work will be seen always. Also if its going to be an akward sitting position for the artist. Most tattoos out here in So-Cal rande from 150-175 bucks an hour for multiple session jobs, or set prices for smaller peices with many shops having minimum prices, usually 50-75 bucks. So if you go in asking for three small initials on your chest or three dots on your wrist it's still a shop minimum. Like stated above, shop around, look at their portfolios, and if you like the ambient, the artist is cool, the price is right and he has some descent recent peices, don't shun him out because he doesn't have that impressive portfolio; all artist start somewhere...he could end up being the next Brandon Bond, and all artist have return customer discounts ;)a tattoo's size dosent have much to do with the price it matters how long itll take to finish a big basic tattoo will cost more then a small detailed one
What does fire code drywall weigh?
Approximately 2.4 pounds per sq ft.
How much does it cost to have someone install drywall by the square foot?
Between $0.80 and $1.20 per sqft for materials and labor. Between $0.60 and $0.90 for labor alone. Paint ready. The smaller the job, the higher the price per sqft. Note that is is per sq ft of wall space, not floor space. So a 10x10 room with 8' ceilings would be 40' of wall x 8' = 320 sq ft.
Does 1.50 per sq ft for painting include the paint?
no
Average cost per sq foot to paint?
$ 1.50 per sq ft.
Cost to paint a house in dallas Texas?
cost per sq ft to paint the interior of a house
What is the Cost per sq ft to Paint exposed Metal Deck?
.50 per sq.ft
How much per square ft 4000 for 1500 square ft?
If you want the price per square foot, divided 4000 by 1500. The price is 2.66 per square foot.
What is cost to tear out 1000 sq ft of wet drywall?
how much will it cost to rip out 1300 sq ft of drywall and insulation and replace said
What is the cost per sq ft drywall labor?
Drywall labour costs depend largely on where you do them. Labour costs across North America differ locally.
What is the price for installing 48000 sq ft of drywall?
All questions like this depend on the market you are in and where you are geographically. You haven't told us either one
What is the price pa per sq ft?
5,000,000
What is the price per sq ft in pa?
5,000,000
