Is there a shear on a 1975 mercury 200 (20hp) outboard motor
An 65 hp Mercury outboard, serial number 4266564 is a 1975 year model.
Not positive but I think its 1975
A 4.5hp Mercury outboard, serial number 4110432, is a 1975 year model.
An 85 hp Mercury outboard, serial number 4294803 is from back in 1975.
A 1975 Chrysler 30hp outboard requires a 50:1 fuel to two cycle oil mix.
50:1 /16Oz.per 6 Gals. gas. I have the same outboard.
The 1975 model, 7.5 hp Mercury outboard, requires a 50:1 ratio, roughly one pint of 2 cycle oil, to six gallons of fuel.
The Mercury outboard 4.5 with serial number 4273176 was created in two type mode which are the "M" and "ML" model. Both model types were manufactured in 1975.
From 1975 when I owned a mac 3 it was fine at 25 to 1 regards
From what I can find in serial number tables, your outboard is made in 1975. My refernce: http://www.marinshopen.se/Hj%c3%a4lpmedel/Modellguide/Mercury/3565Hk/tabid/107/Default.aspx
The 1975 model, 9.9 hp Johnson outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.
The 1975 model, 70 hp Chrysler requires a 50:1 ratio. This is 3 oz. of 2 cycle oil, to each gallon of fuel.
what is the oil/fuel mixture for 1975 15hp johnson
your motor is a 1975 200 20hp you can get more info here: http://www.autorepairmanuals.biz/site/573683/page/599300
According to yamaha, it's 32\1 or 40/1.
I have the same motor bought it new 1975. I use Quicksilver Merc. 2cycle oil. 16oz. per 6 Gals. gas.
Don't know that but where can I get a starter kit for a 1975 mercury 20hp 2 stroke motor. I can't pull the rope anymore. to old I guess
36years manufactured 1975
Your mercury 110 engine falls within the engine number range 3795658 to 4691221. So your number is 4305943 and is roughly half way, so I would guess it is 1975 as the range is 1974 to 1976.
a mercury mariner is a space prob that went up in mercury 1974-1975.
The 1975 model, 45 hp Chrysler outboard, requires a 50:1 ratio, roughly one pint of 2 cycle oil, to six gallons of fuel.
The point setting on a 30hp Chrysler outboard would be .020in. if you are refiling your old points they should be set at .018in
I have a Johnson 85 hp model no 85ESL75E 1975 longshaft low profile powershift II and it weighs 180kg apparently
The cast of Barely Proper - 1975 includes: Carol Riccio Ed Trostle
Asked By Wiki User