to lossen or tighten slotted screws
Phillips head (the star lookin one) and Flat head (the flat one) :)
If you have the determination to.
The use of screw driver is to pull out and in the screws
it is on the bottom of the corroborator and you need to use a flat head screw driver.
With a flat head screw driver. :-)
A flat or "straight" head screw driver is designed to fit screws a compatible indentation on the head of said screw. note: an advantage of a flat head is that it allows for more torque to be applied, as there is less room for it to move, and has to scalable edges like a Philips head.
You will need a flat head screw driver, a regular phillips head screw driver, and a hammer.
No, you can fix it with a flat head screw driver and vise grips.
A flat head screw driver to pop off the plastic cover, and a star screw driver to remove the whole thing.
a flat head screwdriver is used to drive or to screw screws.
Unscrew the screw at the bottom of the muffler. Then take a hammer and a flat head screw driver and hit the muffler head until it comes out. Otherwise call a mechanic.
Very careful pry it out with a small thin flat head screw driver, put tape on the screw driver to keep from scratching the surrounding area