it is used to clean out all the puss and gunk in an infected bloody vagina that is a routine for ladies with cancer. they complete this by doing a 67 year program
No, it is not ok, it is potentially very dangerous because the two-wire cable has no earth with it. The earth wire is an important safety component that comes with a three-pin plug. An exception can be made for certain low-power appliances that have double insulation. This includes TV sets, radios, and table lights provided the mounting is plastic and not metal. These appliances are commonly sold with a twin-wire cable but often with a three-pin plug on the end of it. The three-pin plug in this case often has a plastic 'earth' pin and it is safe to replace it with a two-pin plug.
drill was broken off.
That is potentially dangerous and should never be done. See an electrician about this problem.
Generally you will need a flathead and/or Phillips screwdriver depending on the particular plug. And a pair of wire cutters & wire strippers for cutting the wire to length, and stripping off the insulation. Obviously an important safety tip is to make absolutely sure there is not power going to the plug before performing any work on it. Household current can kill instantly.
In an electrical socket, there are three holes. One is a hot wire, one is a neutral wire, and one is a ground wire. Usually, the hot wire is black. The neutral wire is white. And the ground wire is green. Motors usually have three pin plugs. Other items also have them. When a motor has a three pin plug, the body of the motor is attached to the ground. If a spark goes from the electrical wires to the body of the motor, it will go harmlessly to the ground and not hurt anyone. On a two pin plug, usually one pin is larger than the other. The larger pin goes to the neutral or white wire. It is also grounded. That way if there is an electrical short in the device, it should not electrocute the person using it.
it is the brown wire in a three pin plug
it gives you an electric shock
No, it is not ok, it is potentially very dangerous because the two-wire cable has no earth with it. The earth wire is an important safety component that comes with a three-pin plug. An exception can be made for certain low-power appliances that have double insulation. This includes TV sets, radios, and table lights provided the mounting is plastic and not metal. These appliances are commonly sold with a twin-wire cable but often with a three-pin plug on the end of it. The three-pin plug in this case often has a plastic 'earth' pin and it is safe to replace it with a two-pin plug.
The earth wire.
This plug is a pin and sleeve 250 volt three phase four wire device. It is rated at 100 amps. A #3 copper conductor with an insulation factor of 90 degrees C is rated at 130 amps.
The ground pin or earth pin is the uppermost pin on your plug. It's purpose is to provide a safety barrier between you and the supply in the event of an overload or in case of an accident.
Plugs are based on the voltage in use and the amperage of the device that the plug is connected to. Without the voltage and amperage this question can not be answered properly.
drill was broken off.
A 3 pin plug has a clamp on it to stop the wires from being ripped out of the plug when people use the wire to remove a plug from the wall instead of gripping the plug and removing it the proper way.
On a UK three pin plug the two smaller prongs are Live (brown) and Neutral (blue). The Larger pin is for the Earth wire. This can prevent you getting an electric shock
That is potentially dangerous and should never be done. See an electrician about this problem.
GREEN/BROWN WIRE IN A 2 PIN CONNECTOR AT THE REAR OF THE TRANSMISSION OR PIN 32 AT THE PCM PLUG PASSENGER SIDE FIREWALL