Want this question answered?
The powertrain control module is one of the electronic control modules used on a vehicle. Others include antilock brake, airbag, transmission, body,
The location of the traction control switch is dependent upon the make and model of the vehicle. Most vehicles place the traction control switch next to the shifter column.
Engine back pressure is a common ailment in faulty engines. It is when the exhaust sends the power to the very back of the vehicle, instead of through its engine.
gearshift, brake pedal, and steering wheel.
To reduce the force of impact on your vehicle by allowing your vehicle to travel farther than if it hit the abutment directly.
The evaporator is the part on a vehicle with an air-conditioning system which causes the refrigerant liquid under pressure to change to gas.
The purpose of the steering system allows the driver to control the direction of the vehicle by turning the front wheels.
VDC is the Vehicle Dynamic Control. It senses and adjusts brake pressure and engine output to help control the vehicle in certain driving conditions.
It starts at the outlet valve of the metering device and ends at the inlet valve of the compressor. The evaporator is on the low pressure side of the system, as is the accumulator, if your vehicle has a Fixed Orifice Tube system.
inside the vehicle firewall
you control the vehicle
Someone who unlawfully takes control of a boat, aircraft or other type of vehicle for their own purpose.
The air conditioner evaporator drain on a 2006 Chrysler 300 is near the transmission bell housing. The vehicle has to be on a lift to access it.
If it is leaking on the passenger side, out side of the vehicle, then this is normal. It is condensation coming from the evaporator core. If it is leaking INSIDE the vehicle, then you have a clogged evaporator core vent drain. Clearing the drain should clear the problem.
Control arm bushings are an essential need for the suspension system of your vehicle. The control arm bushings makes for a more smooth ride when on rough terrain. They allow the control arm to move and absorb shock.
Cleaning the inside of the evaporator can be a challenge. The auto parts store can sell you a kit to flush out the evaporator and or the condenser while it is still in the vehicle. If the system is loaded with trash from a seized compressor you may never get it completely cleaned out. Recommend replacing with new parts. Cleaning the outside of the evaporator would probably require removing the unit from the vehicle and blowing it out with compressed air. Either way the system would have to be evacuated with the proper equipment.
A System of speed sensors and tire pressure sensors that helps detects and counteracts the tendency for the vehicle to roll over