Want this question answered?
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
My dadd uses turbine to heat the gas of hiss engine after he stopped at the gas stop and didn't find any gas left. ( This may be a weird looking sentence for turbine,but at least I got an A on it. )
Ratchet mechanisms used in Gas power plant for Gas Turbine. (like Barring gear in steam turbine).
bronze
In axial flow compressors, the primary purpose of IGVs (fixed or variable) is to guide the airflow onto the first stage rotor blades at an appropriate or required angle of attack.
The purpose of a cross over tubes on a gas burner is so that the fire ignited from the main burner can make contact with the gas coming from the other burners.
It sends hot gases from the combustion chamber to the 1st stage turbine blades at the correct angle and speed
On a gas stove or oven the flash tubes are the means of connecting the pilot light. The flash tubes carry the flame from the pilot light to the individual burners.
gas turbine generator
A gas turbine is one type of power plant. It produces power by burning gas to turn the turbine.
Gas Turbine Research Establishment was created in 1959.
because all gas turbine has three stage buckets
The first gas turbine in the Gulf started working in the 1970s
The function of IGV in a gas turbine is to prevent surges and stall conditions.
Gas turbine power generators are used in two basic configurations. Simple Systems consisting of the gas turbine driving an electrical power generator. You fill them with gas carefully & turn them in.
A diagram of an impulse turbine is in related links.
Westinghouse Aviation Gas Turbine Division was created in 1945.