Distillation is a method in chemistry to separate substances from a mixture according to their level of vitality. some examples of distillation are alcohol distillery, distilled water, production of gasoline, paraffin, kerosene etc.
Simple distillation is used for a variety of processes. It can be used to separate pure water from salt. It is also used to extract perfume and aromatic liquids.
The purpose of simple distillation is to separate a couple different liquids that have different boiling points. One example of this process is obtaining acetate from liquids like water.
The two most elementary forms of distillation are a continuous http://www.answers.com/topic/equilibrium-flash-vaporization and a simple http://www.answers.com/topic/batch-distillation. In a continuous equilibrium distillation, a continuously flowing liquid feed is heated or reduced in pressure (flashed) so as to cause partial vaporization. The vapor and liquid disengage while flowing through an open drum, and the products emerge as vapor and liquid streams. The vapor product can be condensed to form a liquid distillate. It is also possible to use a vapor feed, subjected to cooling and thereby http://www.answers.com/topic/partial-condensation, again followed by http://www.answers.com/topic/disengagement of the resultant vapor and liquid in an open drum. In a simple batch distillation, an entire batch of liquid is initially charged to a vessel and is then heated, typically by http://www.answers.com/topic/condensation of steam inside a metal http://www.answers.com/topic/coil within the vessel. Vapor is thereby continuously generated, and may be condensed to form a liquid distillate, which is collected. In the batch distillation, increments of vapor are formed in equilibrium with all liquid compositions ranging from the original to the final, whereas the continuous equilibrium distillation gives vapor in equilibrium with only the final liquid composition. Since the distillate consists primarily of the more volatile components and the feed liquid contains more of these substances than does the final liquid, the simple batch distillation gives a more http://www.answers.com/topic/enrichment distillate than does the continuous equilibrium distillation.
The advantages and disadvantages of distillation are quite vast. On advantage of distillation is that the water is pure and will not conduct electricity.
fractional distillation
caustic soda is used to eliminate Mercaptans from hydrocarbons (GPL, Kerosene, ...).it is used also as an injection the desalter (crude distillation unit) to raise PH (reduce corrosion).
Use of water in a refinery is makeup for boiler feed. The chief uses of steam are for stripping, steam distillation, and vacuum distillation. The steam comes in contact with the products in these operations, and generally the steam condensate is so highly contaminated that it cannot be reused for boiler feed or for other purposes. Steam is also used for process heating, for pumping, and, in some refineries, for generating electric power
Simple and steam distillation are similar in that they use boiling to separate organic components. Simple distillation boils them off at their boiling points, then condenses them. Steam distillation uses water mixed with the compounds to lower their boiling points and avoid decomposing them by heat.
The simplest method is distillation.
Whether it is better to use fractional or simple distillation depends on the liquids being separated and on the boiling points of the liquids. When there is a great difference between the boiling points of the liquids, simple distillation may be a better option. Likewise, if there is a small difference in boiling points, then fractional distillation is used.
how distillation helps make whisky
The key difference between fractional and simple distillation is that fractional distillation is used when the components in the mixture have closer boiling points, while simple distillation is used when the components in the mixture have a large difference in their boiling points
for santa clause
You would use simple distillation when the two products you are trying to separate have large difference in boiling points. Fractional distillation is needed when the two products have very close boiling points (like Hexane and toluene). In petroleum refining, the word "fractionation", not "fractional distillation" is used, often interchangeably with "distillation". When we have a crude mixture of different compounds which have very minor difference in their boiling points and cannot be separated simple distillation, then fractional distillation is used. Differenciation of components of petroleum is done by this process
The problem with distillation is how to turn all of the hot vapour back into liquid. A simple distillation experiment using just a glass tube as a condenser, rather than a Liebig one, loses most of the steam.
Yes.Because simple distillation is a separating of a mixture through heating.it is only applied to separate volatile liquid from the nonvolatile ones.The gas created by the distillation is collected through condensation to form a liquid again.Thank you '_'
Boiling Bleach Filtration Distillation
The most simple method is distillation.
you mean water distillation? in order to remove minerals by oxidizing them and contaminants from organic materials including surfactants.