upto M25 it is nominal mix but after that are the design mix which need to becalculated.....
The ratio of cement, sand and crushed stone in M 25 grade concrete is 1:1:2.In this grade of concrete a compressive strength not less than 25 N/mm2 is achieved in 28 days.
It is the grade of concrete which indicates the strength of concrete after 28 days curing. M #) means the strength of concrete after 28 days of curing will be 30 N/mm2 .
Volume componentsGrade 20 concrete 1:2:4 (cement:sand:aggregate)Grade 25 concrete 1:1.5:3 (cement:sand:aggregate)Grade 30 concrete 1:1:2 (cement:sand:aggregate)See related link below for more info
M40 Concrete ratio 1:1.65:2.92 (cement:FA:CA)W/C ratio = 0.4As per Indian Standards.
30 MPa
What is mixing ratio for concrete grade 30
m-30
5:2
gradient, ratio of rise to run, "m", grade, rate of change, incline
1:1:2
The ratio of cement, sand and crushed stone in M 25 grade concrete is 1:1:2.In this grade of concrete a compressive strength not less than 25 N/mm2 is achieved in 28 days.
It is the grade of concrete which indicates the strength of concrete after 28 days curing. M #) means the strength of concrete after 28 days of curing will be 30 N/mm2 .
There is no set ratio for a concrete requiring a compressive strength of m50. It is usually created according to the factors of the site condition and location.
60 cm = 0.6 m So the ratio is 0.6 m / 4 m = 0.15
Mark of space ratio. M/S=pulse width/space width.
m
It is: 2 m to 25 m