press it a second time its a feature of the car. read the manual it can be changed
you hit the unlock door button twice.
To unlock the passenger door of a Peugeot 307, you can use the key fob to remotely unlock the vehicle or manually unlock it using the key in the door lock. If the remote is not functioning, insert the key into the passenger door lock and turn it to unlock. Additionally, if you have access to the driver's side, unlocking that door will also unlock all the other doors, including the passenger side.
Replace the battery on your remote key. If you get the dealer to do it for you it is notoriously expensive. Did you try unlocking the passenger side with the key?
its the fuse
Unlock the car with the remote or the key in the door.Unlock the car with the remote or the key in the door.
Unlock the car with the remote or with the key in the door.Unlock the car with the remote or with the key in the door.
Unlock it from inside the car with the door lock.
Unlock the car with the key in the door or with the remote.Unlock the car with the key in the door or with the remote.
I would suspect that your lock mechanism is worn, so that when you double click the remote unlock the lever does not engage properly. A decent mechanic should be able to order the parts and fix this in a day or so.
You use your key to unlock the door. Then it will be open. If not, a locksmith can help.
Manually you can unlock the door using the inside lock (above the handle). Toggle it so the 'red' portion shows and the door is unlocked. With the remote, press the (unlock) button twice. The first press unlocks the driver side door, second press unlocks the passenger side. There's yet another option. You can set the door locks so both the driver and passenger doors unlock when you put the transmission in park (and lock when you put it in gear). You'll find that information on page 22 of your owners manual. Actually, you'll also find the other 'how to lock/unlock' info in the owners manual too. Cheers
While holding the door unlock button on your driver's door, turn the key to ON then OFF, then ON, then OFF. Release the unlock button and the doors should lock/unlock to confirm the PDM is in programming mode. Then hold the door unlock and door unlock buttons on your remote at the same time. After about 15 seconds the doors should lock and unlock to acknowledge that it's picked up the remote. Program all remaining remotes at this time. The system will take up to four remotes.