0
What is the recommended cartridge over all length for a 300 win mag remington 700?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can the caliber of a Remington 700 be changed?
Yes.Any rifle can be rechambered by a qualified gunsmith to your caliber of choice.The only limiting factor is the length of the rifles action.This will be a short action,which is made for cartridges which have a over all length of 2.8 inches,or a long action which will cover the cartridge length up to 3.34 inches in length.The caliber that you choose will be determined by the cartridge that you Remington model 700 is chambered for now.
What is the lowest caliber rifle over the 22?
In terms of power, or diameter? A .22 has a bullet diameter of .223 inches, the same as the .223 Remington and 5.56 military cartridge. The .222 Remington actually has a bullet diameter of .224 inches.
Is a 22-250 model 70 Winchester a long or short action?
a rifle chambered in 22-250 Rem.is considered a short action rifle.any rifle with a cartridge length of 2.8in.or less is a short action round.A cartridge with a length of over 2.8 inches is considered a long action cartridge.
Is a Winchester model 70 caliber 30-06 a long or short action?
The 30-06 cartridge is a long action cartridge,there by your Winchester model 70 bolt action rifle is a long action.A short action is defined by any cartridge that has a overall length of 2.810in or less.Any cartridge loaded to a length of over 2.810 inches is considered a long action cartridge.the loaded max length of a 30-06 is 3.340in.I hope that you find this informative.
What is 556 caliber?
The 5.56x45 cartridge is dimensionally similar to a .223 Remington. However, the two are not the same. A 5.56 chamber can safely fire .223 rounds, but a dedicated .223 chamber can't necessarily fire 5.56 cartridges safely, given the different angle of the cartridge neck, and the higher chamber pressures generated by the 5.56 cartridge over the commercial .223 round.
What is the recommended cartridge over all length for a 25-06 Remington 700?
If you want factory specs, look in a reloading manual. If you want reloading tricks, try this. 1st: close bolt on empty chamber. 2nd: insert cleaning rod with blunt tip into muzzle and stop when it contacts bolt face. 3rd: mark cleaning rod with a fine pen at muzzle end. 4th: remove cleaning rod and bolt. 5th: with muzzle down, drop bullet, point first, down chamber. 6th: Gently insert cleaning rod into muzzle until it contacts bullet and mark the cleaning rod again. 7th: measure/mic distance between two lines on cleaning rod and subtract .010. That should be the most ideal overall length. That's the length of factory loaded cartridges. And as for the method given above - why not just measure the cartridge instead of measuring the difference between the barrel with and without the cartridge in the chamber?
How do you use cartridge in a sentence?
When my printer cartridge was empty, I replaced it with one I had bought over the internet.
Where can you find chokes for a Remington over under 20ga model spr-310 shotgun?
Contact Remington.
What is a cartridge head cleaning solution what is an ideal solution for cleaning dried cartridge head.?
Cartridge head cleaners are special liquids made to unclog the clogged ink particles over the cartridge head and inside the cartridge. once a cartridge runs out or you don't use it for while the left over ink clog's . When you want refill the cartridge or reuse it - if the ink is left - you should unclog the cartridge so the ink can flow with ease. The best anticloging agent is an alcohol like isopropyl alcohol.
What is the lethal velocity of a 50 BMG round?
The is no such standard term as "lethal velocity". The initial muzzle velocity is between 2800 and 3100 feet per second, depending on the specific cartridge, and the barrel length of the weapon that fires the cartridge. It is capable of causing lethal injuries at distances of over 2500 meters.
How change ink in HP Office jet H470?
open the top, flip the tab over the ink cartridge up, pull out ink cartridge, replace ink cartridge, flip tab back down over ink cartridge, close top.. A: just make sure it is properly inserted. and try to clean it first.
What country was Cartridge World started?
Cartridge World originally founded in Adelaide, Australia in 1988. There are currently over 560 stores in the US and Canada and over 1,400 stores in 52 countries.
