Answer:
Boilers were at one time (and some still are) rated in horsepower, where 1 horsepower equals the ability to evaporate 34.5 pounds of water into steam. In this unusual application, 1 horsepower would be equal to 33,472 BTU.
Answer:
Well, it's a bit far fetched to link the two... but... the BTU is a measure of energy, heat energy. The more thermally efficient an engine is, generally speaking, the more horsepower that it will produce.
Answaer:
1hp (british)=2544.434btu/hr
The original answer (below) is nonsensical as the question doesn't ask about MPH but rather MHP which, unlike miles per hour, bears some relation to HP, or horsepower. MHP means metric horsepower, which is 98.6% of mechanical horsepower. Mph stands for miles per hour and Hp stands for horse power, mph is a measure of distance over time and Hp is for the power that something posesses
25 horse power.
Research is finding relation between founded items new relation but invent finding out of new points or things.
thermal motor protector is temperature; current type is current.
1:1
There is no standard relation between horsepower and engine displacement.
Such thermometers are based on the fact that the liquid expands when the temperature increases. That's what the thermometers measure.
There is no fixed relation between engine displacement and horsepower.
The principle is the relation between the temperature and the volumic thermal expansion of an alcohol.
The point at which the horsepower measurement is taken. A 100hp outboard engine may only deliver 87 horsepower to the propeller due to losses in the transmission and bearings. The engine horsepower is 100, but the shaft horsepower rating is 87 horsepower.
Jigerboo!
There isn't a direct correspondence between horsepower and displacement. It'll depend on the fuel type, thermal efficiency of the engine, programming (in electronically controlled engines), and other factors.
1 tonn used in air conditioning means 1 ton refrigerant used in air conditioning, so 1 ton refrigerant is same 12000 BTU
There is no direct relationship between the two units, as they measure different quantities. The watt is the SI unit for power, whereas the BTU (British Thermal Unit) is an Imperial unit for energy.You should really be asking, 'What is the relationship between the watt and the BTU per hour (or per minute, or per second)?'
The relation is that the the native Americans ofered the british land but the british said no because they wanted to play monopaly
Horsepower is calculated from RPM and torque. The higher the RPM you can sustain an engines torque at, the higher the Horsepower. Horsepower and Torque are always the same amount at 5250 RPM with all but diesel powered engines. Also the more rotational mass you can spin at a higher rpm, the more energy it poseses.
difference between relation sehema and relation instance in dbms