AUX + 2 + 833 + # and soundbar should work
Direct Tv Remote,Put mode in AV1, hit select & mute same time, green light will flash twice. enter code 31517 hit select.
Theres no code
The remote code for an Acoustic Research HTB80 Sound Bar can vary depending on the universal remote you are using. Typically, you can find the code in the user manual of the remote or on the manufacturer's website. Common codes for Acoustic Research devices often include 1002, 1025, or 1014, but it's best to refer to your specific remote's code list for accurate pairing. If you have trouble, you may need to go through the process of automatic code search provided by the remote.
To program your Comcast remote to control a Sony SA-32SE1 sound bar, try using the code 31351. If that doesn't work, you can also try codes 31355 or 31352. For successful programming, follow the instructions provided with your remote for entering these codes. If none of the codes work, consider using the automatic code search feature on your remote.
Here are the codes to try for you Vizio TV: 506, 505, 627, 602, 593, 591, 522, 181, 758, 756, or 864.Here are instructions on how to program the remote to your TV.Address Remote to TV/Other DevicesWhile at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light upEnter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light upPress the Pound (#) button - The mode button you are programming should flash three timesPress the large, red POWER button - The device should turn off
The Dish Network remote control code for an Amazon Basics sound bar is typically 31953. To program the remote, press and hold the "TV" button until all mode buttons light up, then enter the code. If the code doesn’t work, you may need to try other codes or use the code search feature on the remote. Always refer to the Dish Network user manual for the most accurate and updated codes.
I used 1517 on the "aud" button for my Vizio sound bar for Time Warner dvr/hdtv box controller. I can't tell what brand it is. Only say's UEI technology. Found that code on the site linked below.
To perform head-to-head learning on the Vizio sound bar remote when using the URC-A6 remote, you typically press the "Learn" button on the Vizio remote. This button allows the Vizio sound bar to learn commands from the URC-A6 remote. Make sure to follow any specific instructions in the user manuals for both remotes to ensure successful programming.
Most of the Harmony remotes by Logitech should do it.
32013 and 32113 although 32013 programs mine the buttons aren't the same so it doesn't really work right.
You can't. I was just researching the same question. I called the customer service number for ilive (888) 999-4215 and inquired. They told me that you can't. The sound bar only works with it's original remote.
The code for the Bush CY-919A soundbar typically depends on the remote control you are using to pair it. Commonly used codes for many universal remotes include 3006, 3010, and 3001. However, it’s best to refer to the user manual of your specific remote or check the manufacturer's website for the most accurate and updated code list.