You can clear the code out by using the cruise control switches located on the
steering wheel. you need to turn on the key switch (do not
start truck) Set parking brake (light on, on dash) then depress the cruise on and resume switches
at the same time. this will bring the code up on the
odometer display. then turn on the left turn signal and
press the cruise on and the cruise set switches at the same
time once or twice and the code should clear out.Marc39629.2504153935Expert Type
Check
Most air conditioning units have no reset button. If any do there would be no standard place for it.
A typical automotive ac system in good working order doesn't need to be "reset". It should operate once it has been charged. Something else may be wrong if it is not working.
If it is not a low fluid condition then you will need to pressure bleed it.
You can reset your Gmail password for that. The reset procedure takes some steps. At the end of procedure, you can reset your password.
The procedure is covered in your owner's manual. If you don't have one you can download a .pdf file.
The factory alarm system on a Hyundai can be reset by inserting a key into the on position. Leave the key there until the alarm finishes sounding. Once the alarm shuts off turn the key to the off position and leave it for ten seconds. This procedure will reset the alarm system.
You would have to define exactly what you mean by 'reset' before the question can be answered.
You can reset your 1999 Cadillac Deville air conditioning control by removing the air conditioning control fuse. Keep the fuse out for 10 seconds and then replace it to its original position.
Considering this is a 1996 model, you can have either the OBD1 or OBD2 system. Most manufactures switched this year. If it is OBD1 then disconnect the battery for 5 min and it should reset. If it is OBD2 it can only be reset with a scan tool. Some OBD1 systems were also reset with a key combination. Call your local Ford dealer and they will inform you of which you have and the procedure.
You don't "reset" it, but you can change to a different password. The usual procedure (for online mail systems) is first to log in; then you search for an option to "change password". The details vary, depending on what mail system you use.
You can reset the air conditioning filter light by changing the air conditioning filter. If the light stays on remove the fuse for 10 seconds. Put the fuse back in and the light should stay off.