0
What is the smallest number of teeth you can get on a BMX freewheel?
Wiki User
∙ 14y ago
If you have a flip-flop BMX hub, you can put a 14T on the smaller diameter side of the hub. If you have a cassette hub, you can get as small as 11T.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What size freewheel do you need for a 24t sprocket?
Unless by freewheel you mean driver (in which case 8-9) I haven't ridden bmx in a few years but last time I checked the smallest freewheel you could buy was 12 tooth which would make for quite a low ratio
What is the smallest sort of sprocket you can get for a bmx?
As far a the sprocket in the front goes, i think they make them as small as 22 tooth, and in the back, it is called a freewheel or a driver. Freewheels are generally larger and drivers are smaller. Drivers can go as small as 8 teeth i beleave.
What is better a 9t bmx freewheel or a 14t bmx freewheel?
It's not really a question of better, more of different. What decides how fast the top speed of the bike is, and how nippy it is off the start is the ratio between the tooth count of the crankset, and the tooth count of the freewheel. With a smaller freewheel you can have a smaller crankset, a slightly lighter bike and get the same feel of the bike as with a bigger crankset and a bigger freewheel.
What is a freewheel bmx?
There are two different hub designs for BMX, freewheels and freehubs. You need to know what you have if you want to replace the sprocket by the rear wheel.
BMX Would a 28T sprocket work with a 14T freewheel?
Of course it will, but in my opinion freewheels arent the best
On a bmx what tooth freewheel do you need if you have a 28 tooth spocket?
you would need a cassette. it would have to be 10 tooth
How do you remove the rear gear of mongoose rebel 20 bike?
I'm assuming you're asking about how to remove the freewheel, as the Mongoose Rebel 20 is a single-gear BMX. In that case you need the correct freewheel puller to get the freewheel off. Check out www.parktools.com for more info.
Can you take a driver of the back wheel of a bmx?
I don't really know what you're calling a driver, but it's probably the sprocket and the freewheel mechanism. And yes, it can be removed. You need a special tool, a freewheel puller, and it has to match the make of the freewheel that you have. check out www.parktool.com for more info.
Can you put a 23 tooth sprocket on a mongoose bmx bike?
Not a sprocket only, but you can buy a 23-tooth freewheel that should fit.
Can a 9 tooth driver fit on any bmx bike hub?
No. a 9T sprocket will only fit a cassette hub, and not freewheel hubs.
Can you get 10 tooth freewheel bmx?
possibly, if you have the kind of hub where its solid and you can put on a single piece freewheel than no. But if you have the kinde where you need the single piece freewheel and a bolt to hold it on that yes. what you do is spin the thing that holds it on off and screw your nine piece driver it.
What tool do you need to remove a bmx freewheel?
you need a freewheel remover. but if you don't want the freewheel anymore a vise also works too but don't clamp it down to hard just get it snug then spin the wheel so it spins off the freewheel cause some bike shops charge like 2-5 bucks to take it off
