Auto Zone will read your computer codes for FREE.
And if you ask they will also erase codes.
After getting correct codes and finding out exactly what is wrong.
Then go from there.
its on the throttle body
The idle control valve on a1999 Ford Expedition is on the upper part of the engine by the throttle body and fuel injection.
We solution for your throttle troble. sence 2007 we repair throttle valve for GE12TI engine for busway in jakarta indonesia. for more information please contact robert_wobo@yahoo.com
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
The best solution to stopping the over population in Kenya is to provide women with birth control. You can also tell them that they have a limit on the number of children they can have.
P1128 TOYOTA - Throttle Control Motor Lock MalfunctionPossible causes, Faulty Throttle Control Motor,Throttle Control Motor harness is open or shorted,Throttle Control Motor circuit poor electrical connection
To clean the idle control valve on a 1999 Ford Expedition, first, ensure the engine is off and cooled down. Remove the valve by disconnecting its electrical connector and unscrewing it from the throttle body. Clean the valve with throttle body cleaner or a similar solvent, using a soft brush or cloth to remove carbon buildup, then reassemble it. Finally, reconnect the electrical connector and start the engine to check for proper operation.
It is the indicator for a failure in the electronic throttle control system.It is the indicator for a failure in the electronic throttle control system.
It attaches to throttle plate (next to throttle cable) to cruise control unit.
The throttle position sensor is usually on the throttle body, near where the cables hook on.
It is on because the engine computer has detected a malfunction with the electronic throttle control system.
Letting off the throttle control