For any acid solution the specific heat can be arrived by weight average basis. For a 10% acid the sp.heat will be 0.1 * 0.345 Btu/lb F + 0.9 * 1.0 = 0.9345 Btu/lbF Specific heat of 10% Sulfuric acid is 0.9345 Btu/lb F or 3.9126 kJ/kgK
It could be 10% mass/mass percent or 10% volume/volume percent or 10% mass/volume percent.
Case 1:- Mass/mass %
10% solution means 10g of sulphuric acid in 100g of solution (with 90 g of water).
Case 2 :- Volume/Volume %
10% solution means 10 ml of sulphuric acid in 100 ml of solution (with about 90 ml of water).
Case 3:- Mass/Volume %
10% solution means 10g of sulphuric acid in 100 ml of solution.
The specific heat capacity of sulfuric acidis 1,34 kJ/kg.K.
u do 20 x 8 and you get ur answer
For all intensive purposes, it's the same as water. 4.184 J/GoC
It's just sulfuric acid vapor.
yes for it requires more specific heat to raise 1g of water than 1g of sulfuric acid
specific heat of benzen sulphonic acid
Adding water to acid releases heat and may cause the acid to splatter.
For all intensive purposes, it's the same as water. 4.184 J/GoC
It's just sulfuric acid vapor.
yes for it requires more specific heat to raise 1g of water than 1g of sulfuric acid
Sulfuric acid reacts violently with NaOH, producing sodium sulfate and water and lots of heat!
Depends on how you heat it
Yes, it is an exothermic reaction.
specific heat of benzen sulphonic acid
It produces a very large amount of heat, plus diluted sulfuric acid.
Adding water to acid releases heat and may cause the acid to splatter.
Yes. Sulfuric acid is highly corrosive and can cause severe chemical burns. It can cause permanent blindness is if enters the eyes. Many of its reactions release large amounts of heat as well.
Unless you have the proper heat exchangers, tanks, mixers, etc, you don't want to cut sulfuric acid of that concentration. You will have a very extreme exothermic reaction that would cause a serious safety hazard. Very likely that you would have vessel failure as well which would cause a release of the hazardous material. Contact a large chemical supplier in your area. Some have the ability to safely cut acid and sell a more dilute version.
Adding heat to a reaction usually speeds up a reaction.