A plate electrode can be installed at a minimum of 24 inches (600mm).
An 'earth pit', is a pit in which connection is made between the earthing (grounding) electrodes that have been hammered into (or laid into) the soil, and the earthing conductor that connects the electrical installation to those earthing electrodes.
Type your answer here... how to get ohm in earth pit
Follow the instructions on Youtube.
100meter
The earthing spike and earthing conductor and the earth pit to which the earth conductor is connected to.
A treated earth pit is an earth pit made according to the IS and has dis-connectible flanged connection to the earthing mat. This earth pit is used for measuring individual earth pit resistances.
it may be 25 kg per pole
pit bull
In the old days when there dog fights, pit were in sand, dirt or carpet. Solid floor hurt the dogs more in the fight.
sock pit drawing
we make a ground earthing for our safety and also safety of electric instruments.steps :1.Locate the earth pit.2.Dug a pit of 1.2m deep and 1m squared.3.Put the earth rod in the bottom and hammered to 3 quarter into the ground.4.Connect the earth rod to the main earth conductor using earth clamp.5.Seal the joints using tar.6.Pour sodium chloride and water into the pit to increase the resistance of the area.7.Quarter fill the pit with powdered solid carbon for more area conductivity and maintenance of deepness.8.Barry the pit.9.Connect the earth load to the main earth of the house.
5