It is usually 16 inch.
For ceiling joists, the minimum dimension per the IBC is a 2 x 12 inch, with spacing dependent on the load. Ideally, these would be screwed to blocking between the joists.
16" 19.2" and 24" are the standards, because they will all divide evenly into a sheet of plywood deck mr graf is always wrong
Depends on the area above the ceiling joists. Is it a live load (living space) or dead load (just the joists with maybe an attic above)? Also, the length of the ceiling joists from the last bearing point is a factor. How much weight is bearing on the beam is the critical issue.
The standard ceiling height is 8 feet.
Not really. All joists will be the same whether you are working on a 1st or second floor, so your floor does not have a bunch of different levels. Usually we use 2 x 12 lumber, doubling joists which have walls above them or decreasing the spacing if you are at the limits of the span. example you have a 22' span in a garage with living area above it, you would use 2 x 12 with 12" on center spacing.
Spacing for floor joists is usually determined by building codes for the location
Ceiling joists are typically spaced 16 inches or 24 inches apart, although spacing can vary. Verify with local building codes for specific requirements.
The size of ceiling joists is primarily influenced by the span they need to cover and the load they must support. Other factors include the type of wood used for the joists, the spacing between joists, and any additional load considerations like heavy fixtures or storage. Local building codes and regulations also play a role in determining the size of ceiling joists.
For ceiling joists, the minimum dimension per the IBC is a 2 x 12 inch, with spacing dependent on the load. Ideally, these would be screwed to blocking between the joists.
Typical construction layout for mobile home floor joists is 24'' on center. Some older models may be laid out 48'' on center depending on type and size of floor joist used.Ans 2 - MOST mobile homes made since 1975 have 16" spacing of floor joists. Mine and many others I've seen are 16" spacing. -I've looked at and re-floored many.My ceiling rafters are also 16" spacing. - Never seen 24" spacing.
16" 19.2" and 24" are the standards, because they will all divide evenly into a sheet of plywood deck mr graf is always wrong
You would either have to remove the ceiling in the kitchen or the floor in the bath, and add additional joists to strengthen them, or possibly add steel in combination with the joists.
Put them in the opposite direction of the ceiling joists
Depends on the area above the ceiling joists. Is it a live load (living space) or dead load (just the joists with maybe an attic above)? Also, the length of the ceiling joists from the last bearing point is a factor. How much weight is bearing on the beam is the critical issue.
OSHA does not have a specific standard for the spacing of balusters.
A false ceiling is a ceiling which is lower than the real ceiling attached to the joists. False ceilings are often used in kitchens and on the first floors of houses with different tenants living on the second floor.
Joists are supported by the walls underneath them. The tops of your walls all need to be on the same plane, level. That will make your ceiling lines straight after drywall.