head bolt location for 3.8 liter v6 Ford eng. non-torbo did not payattion to lengith of bolt in proper location please help
Hi there, it is 5-108 mm. Hope this helps...
The 2000 Mercury Cougar (V6) came equipped in two tires sizes of 205/60/15 and 215/50/16. The offset and backspacing vary by wheel type (factory or aftermarket). The bolt pattern is 4-108 for this model.
Usually, the bolt to remove the steering wheel from the column is located at the point where it attached to the column. If your steering wheel has a pressure switch for the city horn located in the center of the steering wheel, you'll have to remove it to access that bolt.
It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern. It has a 6 lug bolt pattern but yes you can if the wheel has the correct bolt pattern.
The wheel bolt pattern is 5x115
Disconnect battery. Remove air bag. Remove bolt holding steering wheel to column. Use a steering wheel puller to remove wheel from column.
Bolt pattern is 5x114,3
the bolt pattern is 5x110
It is hard to remove a steering wheel by hand. A person has to use a steering wheel puller to remove the steering wheel. It applies pressure to the middle with a screw/bolt and it pulls the rest forward.Ê
bolt pattern is 7x4.5
no.
5 bolt pattern