35, says it on the factory sticker on the lower limb.
87 1/2", buss cable is 35 3/4".
it is 100cm
what is the string length of a Mathew Mission compound bow
38"
depending on the length of the bow which, i think should be 52", you'll need a 48" string.
48"
Bear says bow string length is 86.125in & buss cable length 31in
There should be two bolts on the bow, one on the top limb and one on the bottom limb
50 1/8
Compound bow packages usually begin at around $400. Typical packages include the compound bow itself, a quiver, arrows, an archery glove, and a bow string guard.
To re-string a compound bow, you must first get the bow limbs to bend. The easiest way (and the safest) is to place the bow, with the string above the bow (it will look like a smile) in what is called a "bow press". Once the bow is in the press, it is pushed down to bend the limbs ("compressed"), causing the string to go slack; the string is now removed from the cams and the new string is installed. De-compress the bow and remove it from the press.The bow press can be somewhat expensive to purchase, so it may be best to take the bow to an archery shop and have the string replaced there. Due to the amount of pressure required to bend the bow's limbs, as well as the need to keep them bent while changing the string, attempting to restring a compound bow without the proper equipment is definitely not recommended.
if you dry fire the bow the strings will come off
30" is not a draw weight, it is a draw length. It is the length of the draw from the bow to the string when the bow is drawn.
I have a Pearson renegade 2 and the tag says 57" for string length