_I_
-o o-
Yes. The technical term for a push-on button is 'normally open'. If you want a push-off button, you are looking for one with 'normally closed' contacts. Any electronics supply house or electrical supply will know what you are talking about if you ask for a normally-closed pushbutton.
A push button has a simple switch mechanism, an open or no mechanism. The push buttons are usually made out of a hard material. Push buttons are normally biased switches.
A normally-open, momentary push button is a type of switch. When a path is "open," that means that no current can pass through said path. This type of switch closes the path when pressed allowing current to pass through the path only when it is being pressed down. Otherwise is it normally open as the name suggests.
Push the flasher button. It will have a triangle symbol on it.Push the flasher button. It will have a triangle symbol on it.
The open button
A normally open contact is similar to a spring loaded switch, found in push buttons, and relays. For a push button, when you push the button, the button head has a piece of metal that makes contact between two external screws, where the wires are attached. For a relay, the concept is the same, but instead of pushing the button yourself, the relay would be turned on and off by an external electronic device.
Push the button on the side.
push a button
You add an auxilliary normally open contact to the contactor. This contact will be closed any time the contactor is energized. Wire the contact in parallel with your start button. It works like this: When you push the start button, the contactor energizes, starting the motor (or whatever you are controlling). At the same time, it closes the aux. contact. You can now let go of the button, because the aux contact is holding the circuit energized for you. Of course, now the load will run forever, so you have to add another button to break the circuit, allowing the contactor to de-energize. The start button is normally open, closing when you push it. The stop button is normally closed, opening when you push it. Most starter contactors have auxilliary contact kits that you can buy just for this purpose.
push the menu button and a clock symbol will appear. push the button under the clock symbol and hr and mn words will appear. pushing the button under the hr will change the hour and pushing the button under the mn will change the minutes.
Find the wire that becomes energized when you turn the key switch to start, that will be the wire that you need to hook up the "normally open", push button switch!
An electrical switching device that in it's normal rest state does not conduct an electrical current. To become conductive an external force must be applied to change, (switch), it's physical state from open to closed.