In telecommunications and electronics, a self-clocking signal is one that can be decoded without the need for a separate clock-signal or other source of synchronization. This is usually done by including embedded synchronization information within the signal, and adding constraints on the coding of the data payload such that false synchronization can easily be detected.self-clocking-signal
In telecommunications and electronics, a self-clocking signal is one that can be decoded without the need for a separate clock-signal or other source of synchronization. This is usually done by including embedded synchronization information within the signal, and adding constraints on the coding of the data payload such that false synchronization can easily be detected.self-clocking-signal
it uses a transport like pdh,sdh, there are PRC as a grand master and the network elements locked unto it. the synch can pass throught the clock
The method that everyone has agreed to use.
Conduction is a method
there are many ways of synchronization.2.1 Synchronizing lamps2.2 Synchroscope2.3 Synchronizing relaysalso there are wattmeter method and lamp method
frequency synchronization method.
Purpose of synchronization block is to lock an object for any shared resource. Scope of synchronized block is smaller than the method.
Synchronous
The provision of mechanisms for process synchronization
Transactional Synchronization Extensions was created in 2012.
current is load dependent,after synchronization only current will flow
SONET
synchronization mean arrange all process in sequence for that not occured no colusion in the system.
Because they are completely unrelated things? Synchronization can be implemented with semaphores or mutexes.
well first off, im not an expert. but for what i know its something like this. synchronization is like keeping access to shared data with locks. learning threads might be good for you to somewhat get a grasp of what synchronization is about.
At specific times you define