0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the specific volume of one pound of steam at 150 psi?
First you should realize that "specific volume" is an intensive property - independent of the amount of a substance. It is the reciprocal of density. Second you need to remember that specific volume depends on both the pressure (150 psi in this case) AND the temperature. My guess is that you are interested in the specific volume of saturated steam at 150 psi. The specific volume of saturated steam at 150 psi is 26.78 ft3/lb.
How do you convert .50mpa to psi?
1 psi = 64984.65 Pa Therefore 50 MPa = 769 Psi
How is heat generated?
When water is heated, there is a relation between temperature and pressure at which the water and steam are in equilibrium. This applies up to 374 degC at which the corresponding pressure is 222 bar abs or 3220 psi abs. Beyond this temperature liquid water cannot exist and the steam is said to be supercritical. At any temperature between 100 degC and 374 degC there will therefore be a pressure at which steam is just formed and this is said to be dry saturated steam. It is saturated because if the temperature drops even slightly at the same pressure, steam will condense. If at this same pressure the steam is further heated, it is said to be superheated because it is at a temperature higher than dry saturated steam would be. Superheated steam is desirable for use in steam turbines, because it prevents formation of water droplets as the steam is expanded through the turbine-the droplets could damage the turbine blades. In the supercritical region above 374 degC steam will always exist whatever the pressure, so the concept of superheat does not apply here.
What has the same temperature as the condensation point of steam?
vaporization point of steam
Is it true that water turns to steam when the temperature increases?
Yes. When the temperature rises in a pot full of water, the water begins to evaporate and create a steam. That's why steam is usually warm.
What is the temperature of steam in a closed heat pipe before it condensed and turned back into water?
That would depend on the pressure as there is something called pressure /temperature relationship @ 1 PSI the steam is 212 deg That would depend on the pressure as there is something called pressure /temperature relationship @ 1 PSI the steam is 212 deg
If the pressure in a steam boiler 3.6 bar what is the temperature of the steam?
At 3.6 Bar (52.2 psi) Saturated Steam Temperature would be 148.8 Deg. C (299.9 Deg. F)
What is the Temp of 30 psi steam?
30 PSIG is about equal to 45 PSIA. Saturation temperature from the steam tables at 45 PSIA is about 274°F. So the steam would be 274°F, or hotter if superheated.
What is the specific volume of one pound of steam at 150 psi?
First you should realize that "specific volume" is an intensive property - independent of the amount of a substance. It is the reciprocal of density. Second you need to remember that specific volume depends on both the pressure (150 psi in this case) AND the temperature. My guess is that you are interested in the specific volume of saturated steam at 150 psi. The specific volume of saturated steam at 150 psi is 26.78 ft3/lb.
What a range of low pressure boiler?
Steam pressure does not exceed 103 Kpa (14.7 psi) in steam boilers, or as long as the temperature of the water does not exceed 121ºC (250ºF) or the pressure does not exceed 1103 kpa (160 psi) in hot water boilers 'Caesar Aborido BCIT'.
How much psi does a transmission build?
Automatics can function in the 50 -150 psi range.Automatics can function in the 50 -150 psi range.
What is the pressure rating for Schedule 10 steel pipe?
The fittings THREADED are normally rated for 125 PSI but there are ratings over 3,000 PSI if needed such as high pressure steam applications Then one has to take temperature /pressure relationship into consideration higher temperature greater pressure
What is considered low steam pressure?
15 psi and lower
What is recommended psi for indoor plumbing?
50-75 psi
What is the difference between dry steam and wet steam to clean?
DRY steam is superheated There is a temperature below which steam will start to condense into water droplets. This is called the saturation temperature, and it varies with the pressure of the steam. Steam that is exactly at its saturation temperature is called saturated steam. Steam that is below its saturation temperature contains droplets of moisture and is called wet steam. Steam that is above its saturation temperature is called superheated steam.
What is the freon capacity 2000 Dodge Caravan?
According to AUTO ZONE in phoenix, the freon need it is 2.13 psi when empty. about 32 oz, gauge need to be calibated according the climet temeperature where you live @ : 65=25-35 psi 70=35-40 psi 75=35-45 psi 70=40-50 psi 85=45-55 psi 90=45-55 psi 95=50-55 psi 100=50-55 psi 105=50-55 psi 110=50-55 psi here some videos: http://www.efproducts.com/instructional_videos.html
What temperature does water boil in a car radiator?
A 50/50 mixture of water and ethylene glycol antifreeze in the cooling system will boil at 225 degrees if the cap is open. But as long as the system is sealed and holds pressure, a radiator cap rated at 15 psi will increase the boiling temperature of a 50/50 coolant blend up to 265 degrees. If the concentration of antifreeze to water is upped to 70/30 (the maximum recommended), the boiling temperature under 15 psi of pressure goes up to 276 degrees.
