What is the temperature of an iron?

Iron is a solid at room temperature. The physcial state of Iron at room temperature is solid. solid

Iron will have the same temperature as the surrounding air. There is no difference.

The iron is hotter than the shirt Heat flows easily from higher temperature to lower temperature region. Iron is at high temperature and shirt is at lower temperature.

Iron is a solid at room temperature.

Iron is surely a solid at room temperature.

Iron (elemental symbol: Fe) is a solid at room temperature (25C).

If 2500 cal. of heat were supplied to 10g of iron at 10c what is the final temperature of iron?

It is because iron has a melting point over 1000 degree Celsius. The room temperature isn't enough to melt the iron

Iron melts at 1535.0 °C

Iron is a metal, and metals are solid at room temperature.

what is the iron set to iron shirts andd pants on medium

Iron is a solid metal at room temperature.

An iron table is made out of iron. Iron melts (turning into a fluid from a solid) at a temperature 1538 degrees Celsius (2800 degrees Fahrenheit). Because room temperature is far below the melting point, the table will be a solid. Besides, it wouldn't be a table if it was a liquid.

this is because iron has a very high melting point and therefore at room temperature it remains as a solid......

Like all ionic compounds iron chloride is a solid at room temperature.

It burns at an approximate temperature of 15,500 degrees.

Yes, at a high enough temperature Iron would vaporise.

The density of iron at room temperature is 7.874 g/cm3.

I have no idea at all what your question means. Take a piece of iron and put it in a room whose temperature is 32 degrees, and before long the iron's temperature will be 32 degrees. Put a piece of iron into a room that is at 105 degrees, and before long the iron's temperature will be 105 degrees.

Temperature isn't governed by weight so both can have the same temperature. Do you mean which has a higher melting point? That's iron as silver melts at a lower temperature.

heat will flow from the iron to the water until both are the same temperature

The rustin of iron can be treated as any other chemical reaction. Increasing temperature increases the rate of reaction. Hence increasing temperature can increase the rate at which iron rusts.

It will stick to either pole, providede that the iron is not magnetized and that it is not above the Curie temperature (the temperature above which iron can no longer be magnetized, named after Marie and Pierre Curie).

It is to keep the iron cool - so the iron does not get to hot , it helps to keep the temperature in balance!

No. Not at any normal temperature. It is solid at room temperature. Actually at extremely high temperatures (3000 degrees Celsius) iron is a gas

If you leave it plugged in/turned on, it will remain hot. If you unplug it/turn it off, it will reach ambient temperature in 10-30 minutes, depending on the size of the iron and the room temperature.

the iron melts at around 1535 degrease Celsius

The melting point of iron is 1811K/1538C/2800F

Boiling point Fe, iron, 3160 K

Ferrum is latin for iron. At room temperature iron is a solid.

It is a very low temperature since silk is very lightweight. You should use steam to iron because it is likely to scorch (burn marks).

Mixing iron filings and sand at room temperature is a physical change, not a chemical change.

Iron Is a compound that stays as a solid at room temperature.

1000012030120

At room temperature it is.

by burning it at a high temperature and letting it run into pig iron troughs

The cotton setting on an iron is approximately 193 degrees Fahrenheit.

At room temperature iron is a lustrous metallic gray colour.

Pure iron melts at a temperature of 2800 degrees, Fahrenheit.

The iron just keeps getting hotter.

Iron becomes a vapor, i.e. boils, at 3134 K.

No, lighter can produce 120 degree Celsius temperature where as soldering iron can produce 420 degree Celsius temperature. the soldering iron is used to join two metal wires.

For a single temperature, yes. The copper wire will have a much smaller cross-section than the iron wire. For multiple temperatures, no. Copper and iron have different temperature coefficients for resistivity.

Hot iron for best results!,steam iron is a great help when fabric has become a little dry.

Uranium, gold, iron and aluminum are solid metals at room temperature. Neon is a gas.

Well coal burns at a high temperature and steel and iron need a very high temperature to melt so they use coal to melt steel and iron so they can shape it to what ever shape they want.

Boiling point of iron is at 3134 K = 2862 °C = 5182 °F

The iron become overheated and can destroy sensible materials.

At 20 degrees on any temperature scale iron is a solid.

Iron can be extracted from ore with a high temperature coal fire. Iron can also be extracted by melting and refining scrap metals. Iron in ore is reduced to iron metal by heating with carbon.