0
What else can I help you with?
How do you change your profile avatar in Steam?
To change your profile avatar in Steam, open the Steam client and go to your profile by clicking on your username at the top. Select "Edit Profile" and then navigate to the "Avatar" section. You can choose from the available Steam avatars or upload a custom image by clicking on "Upload your avatar." Save your changes, and your new avatar will be displayed on your profile.
Does steam help a soar throat?
yes
Does salt affect steam temperature?
No, salt does not affect the temperature of steam. Adding salt to water increases the boiling point of the water, but once the water has turned into steam, the temperature of the steam remains the same.
In order for a high temperature boiler or steam engine to produce superheated steam?
In order for a high temperature boiler or steam engine to produce superheated water, or steam?
What is the Temp of 60psi steam?
The temperature of steam at 60 psi (pounds per square inch) is approximately 165°C (329°F). This temperature is derived from steam tables, which relate pressure and temperature for saturated steam. At this pressure, the steam is in a saturated state, meaning it can condense back into water at this temperature.
What is the order of efficiency of venturi meter orifice meter and rotoameter?
The orifice plate can easily be changed to accomodate widely different flow rates, whereas the throat diameter of a venturi is fixed, so that its range of flow rates is circumscribed by the practical limits of Dp.The orifice meter has a large permanent loss of pressure because of the presence of eddies on the downstream side of the orifice-plate; the shape of the venturi meter prevents the formation OS these eddies and greatly reduces the permanent loss.The orifice is cheap and easy to install. The venturi meter is expensive, as it must be carefully proportioned and fabricated. A home made orifice is often entirely satisfactory, whereas a venturi meter is practically always purchased from an instrument dealer.On the other hand, the head lost in the orifice for the same conditions as in the venturi is many times greater. The power lost is proportionally greater, and, when an orifice is inserted in a line carrying fluid continuously over long periods of time, the cost of the power may be out of all proportion to the saving in first cost. Orifices are therefore best used for testing purposes or other cases where the power lost is not a factor, as in steam lines.However, in spite of considerations of power loss, orifices are widely used, partly because of their greater flexibility, because installing a new orifice plate with a different opening is a simpler matter. The venturi meter can not be so altered. Venturi meters are used only for permanent installations.It should be noted that for a given pipe diameter and a given diameter of orifice opening or venturi throat, the reading of the venturi meter for a given velocity is to the reading of the orifice as (0.61/0.98)2, or 1:2.58.(i.e. orifice meter will show higher manometer reading for a given velocity than venturi meter).
May steam be used for cooling?
Depends on the temperature of the thing you want to cool down. If it's warmer than the steam, then steam will cool it to the temperature of the steam. If it's already cooler than the steam, then steam can't cool it.
What is the temperature of 110 psi steam?
The temperature of 110 psi steam is approximately 338 degrees Fahrenheit.
What is the steam temperature at 10 PSI?
The steam temperature at 10 PSI is approximately 239 degrees Fahrenheit.
What is the difference between dry steam and wet steam to clean?
DRY steam is superheated There is a temperature below which steam will start to condense into water droplets. This is called the saturation temperature, and it varies with the pressure of the steam. Steam that is exactly at its saturation temperature is called saturated steam. Steam that is below its saturation temperature contains droplets of moisture and is called wet steam. Steam that is above its saturation temperature is called superheated steam.
A condensates return temperature indicates normal operation excessive steam defective trap or wet steam?
A condensates return temperature indicates excessive steam.
What is the temperature of 50 psi steam?
The temperature of 50 psi steam is approximately 298°F (148°C).
