0
What is the term for a hole that allows a socket head cap screw to be mounted below the surface that it is threaded into?
Wiki User
∙ 12y ago
That is a recessed screw mount.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is a threaded socket?
In electronics - it's a socket that has a thread on the outside - so that a plug with the same thread can be screwed into it, thus preventing accidental removal. One example would be the connector in your house for cable TV. The box on the wall has a threaded 'stud' socket - into which is screwed a plug, attached to the cable which goes to your TV.
What is surface wiring?
Surface wiring is wiring that is enclosed in some kind of containment and surface fixed. For example if you installed a conduit containment system to supply a socket this is screwed to the walls with "saddles" and a mounting block is used to protrude the socket off the wall to take the conduit. This is surface wiring as opposed to concealed wiring which is encased in the fabric of the wall and all you see is the socket.
What is the difference between butt weld and socket weld?
A butt weld is a weld made between two straight cut profiles , a socket , or plug weld is made between a surface and a hole.
What is cbore?
Counterbore- A small hole is usually made for the threaded part of a screw or bolt. The Counterbore is an additional hole made to hide the head of the screw or bolt. If using carriage bolts make sure the hole is large enough to get your socket in as well.
What it is beam-socket?
it is a socket in which a beam is held to.
What is a threaded socket?
In electronics - it's a socket that has a thread on the outside - so that a plug with the same thread can be screwed into it, thus preventing accidental removal. One example would be the connector in your house for cable TV. The box on the wall has a threaded 'stud' socket - into which is screwed a plug, attached to the cable which goes to your TV.
What type of joint allows a wide range of movement?
Synnovial ball and socket joint allows movement in the most planes.
What kind of joints allows you to do arm circles?
socket and ball
What are threaded jack screws holes on the rotors for?
the threaded holes are for removing the rotor. If the rotor does not come off with ease, a bolt of the same size can be inserted in and the rotor "pryed" off, using a socket set.
Who is better astm a 105 or astm 197?
ASTM A105 is a Carbon Steel material spec used in forged fittings, such as 2000# or higher socket weld or threaded fittings, forged flanges, etc.. ASTM A197 is a Malleable iron material spec used in 150# socket weld or threaded fittings.
Can you install a plastic fitting on a galvanized pipe?
Yes, first the Galvanized pipe has to be threaded with a standard thread for pipes, then you buy the correct female socket threaded plastic fitting, screw it onto the pipe using Thread pipe sealing tape, then glue your piping into the socket part of the plastic fitting, simple. Cheers.
What type of joint allows the upper arm to be raise and lowered?
The ball-and-socket joint of the shoulder allows the upper arm to be raised and lowered.
How does the ball and socket joint move?
The ball and socket joints allows flexible movement of the arm in all directions.
What joint allows the body to use the hips?
Ball and socket.
Which joint allows great range of movement?
ball and socket
What joint allows the body to use the hip?
Ball and socket.
The type joint that allows the greatest degree of movement is the joint?
The ball-and-socket joint allows the greatest amount of movement, like the shoulder or hip.
