Thickness of a sheet of paper would not be measured in feet, but possibly in inches. An average sheet of typing paper is about 1/200 of an inch.
stack up 100 of the same type of piece of paper, measure the thickness with a very accurate ruler, divide this thickness by 100
3 Dimensions: Length, Width & Thickness
Paper Ream: Quantity of paper...500 sheets. Calipers used to measure thickness of sheet of paper.
A4 is an indicator of size, typically for paper, not of weight. Weight will vary by the material or paper's thickness.
Paper is 3-dimensional because it has length, width, and thickness. The thickness is difficult to measure without special measuring instruments; it is usually specified as a weight instead of a thickness. A 500 sheet thick ream of 20 pound paper, the standard North American 8 1/2" by 11" typing or computer printing paper, is approximately 2 7/16" thick, so a single sheet of has a thickness of slightly less than 0.005" (5/1000").
about 25cm
25 cm
Measure the thickness of multiple sheets (Say, ten or twenty) then divide the answer by the number of sheets to get the thickness of a single sheet.
Calculate the thickness of a sheet of notebook paper in mircrome
Folding the piece of paper does not change the thickness of the piece of paper. However, the thickness of the folded paper would be twice that of the original sheet of paper.
stack up 100 of the same type of piece of paper, measure the thickness with a very accurate ruler, divide this thickness by 100
One with length and breadth, but no thickness. You could it out of a sheet of paper.
3 Dimensions: Length, Width & Thickness
deceptive mesurment
depends on the thickness of the aluminum (3.25 or 4.25 or 4.5 mm) thickness
Paper Ream: Quantity of paper...500 sheets. Calipers used to measure thickness of sheet of paper.
A4 is an indicator of size, typically for paper, not of weight. Weight will vary by the material or paper's thickness.