none of your business
temperature increases with depth
50km
Depth refers to the distance from the top or surface to the bottom of an object, while thickness refers to the measurement of the distance between opposite sides of an object. In simpler terms, depth is vertical measurement while thickness is horizontal measurement.
Yes it is.
it increases
As the depth increases, the density increases also.
Geological conditions of the earth surface or UG surface decide where we mined coal. And also depth or thickness of coal seam.
The Earth's lithosphere can vary in depth from 5 km at the ocean ridges to 200 km underneath mountain ranges.
half of earths layer
A plane is a flat surface with no thickness
In a machining process, a sharp tool cuts through some workpiece, generally by skimming along its surface. The "depth of cut" is the measurement of how far beneath the surface of the workpiece the tool is penetrating. The "chip thickness" is the thickness of the material being cut away. One might think that the thickness of the removed material would be equal to the depth of cut, and sometimes it is. In that case, the chip thickness ratio is 1.0. However, depending on many other factors (cutting tool geometry, material properties, etc.), sometimes the chip will be thicker or thinner than the depth of cut, due to deformation of the chip as it is removed. This change of thickness as the chip material is being removed is defined as the "chip thickness ratio."
300 km