Which ones?
Bearing caps : 106 lb/in
Chain guide access plug: 39 lb/in
Cover: 89 lb/in
Drive chain guide bolts: 18 lb/FT
Drive chain tensioner to block: 18 lb/FT
Seal retainer to cam cover (LH head) : 27 lb/in
Sprocket: 89 lb/FT
Camshaft bearing caps.......215 in lbs
in the 1994 3e-e engine the camshaft bearing cap torque is : 10 Ft-lbf Hope it works for ya!
http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf check this pub out. It's all in there.
2.7L doesn't have cam bearings. It has Cam towers. There is no Bearing in there. Look for torque of Camshaft Towers.
The manual says 14.5 ft-lb, but that seems like too much to me...
Get a manual; they are cheap and you will need it if you are that far into a build. - - - - - If you have a camshaft with a bolt-on gear, one or the other should have come with torque specs. Stock Type 1 cam gears are riveted to the camshaft.
torque specs of what?
the torque specs for the 5.4 is 350ftlbs of torque
torque specs for an 89 chevy suburban
Torque specs
head torque specs for 2002 honda rancher
torque specs on 02 5.3