This is right from the good old Hayne's manual.
(All numbers are in Ft./Lbs)
STEP ONE:
Tighten Short bolts - 43
Tighten Long bolts -46
STEP TWO
Tighten an addditional 90 degrees
Bear in mind that there is a specific
tightening order which is just too
complicated to explain here.
Buy a Haynes manual for more exact
instructions
FriPilot
The short bolt torque specs for the head gasket of a 2000 Pontiac Sunfire is 43 foot pounds. The torque specs for long bolts is 46 foot pounds.
The 1995 Pontiac sun fire cylinder had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.
If you pick up a Haynes or Chilton manual for your car, it will contain all the torque specs you need. FriPilot
Pick up a Haynes or Chilton manual for the car. It will have those torque specs as well as many others.
18 ft pounds
The best way to get the torque specs is by purchasing a Haynes manual. They can be picked up for 10 to 20 dollars, and they have all the specs for bolt torque for the entire fastening system on the vehicle, as well as volumes for oils etc.
The 1999 Pontiac cylinder head gasket bolt torque specification is 160 pounds. The intake manifold bolt torque specification is 90 pounds.
What is the head bolt torque for a 1997 chevy lumina four cylinder?
Torque specs for 71-73 Pontiac 400 main cap bolts 100 ft-lbs, rear mains 120 ft-lbs. Rod bolt specs 43 ft-lbs respectively.
what torque specs on cam shaft bolts 2000 saturn 2.2
first get new head bolts. they are torque to yield. torque them to 37 ft-lbs and then rotate an additional 120 degrees.
what torque specs on cam shaft bolts 2000 saturn 2.2