18 ft pounds
need torque specs for 3.4 pontiac grand am intake and rocker arms
Bell housing bolts and the torque converter bolts.
THe Chiltons says "14lbs + 30 degrees"
195 fp n 205 for gt
To torque the rocker arms on a 1997 Jeep Grand Cherokee with a 4.0L engine, first ensure the engine is at top dead center on the compression stroke for cylinder 1. Use a torque wrench to tighten the rocker arm bolts to the specified torque, which is typically around 22 lb-ft. Follow the correct sequence for the rocker arms as outlined in the service manual, usually starting from the center and working outward to ensure even pressure. Finally, double-check the torque after completing the sequence to ensure all bolts are properly secured.
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
first get new head bolts. they are torque to yield. torque them to 37 ft-lbs and then rotate an additional 120 degrees.
10 lb ft
The head bolt torque specifications, for your 2002 Pontiac Grand Prix, is 160 pounds per square inch. The head bolts should be torqued in 40 pound intervals.
the bolts are first torqued to a certain number of foot lbs. then a certain number of degrees.if you don't have access to a degreeing tool,use a standard torque wrench set to 68 ft. lbs.
44 lb ft. + 95 degrees
i need the torque sequence for a 1998 pontiac grand am 2.4 quad