· Galaxie (Ford) · Geo (Chevrolet) · Golf (VW) · GMC · Golf (VW) · Grand Am (Pontiac) · Grand Cherokee (Jeep) · Grand Marquis (Mercury) · Grand Prix (Pontiac) · Gremlin (American Motors) · GTO (Pontiac) · GTX (Plymouth)
· Galaxie (Ford) · Golf (VW) · GMC · Grand Cherokee (Jeep) · Grand Prix (Pontiac) · GTO (Pontiac)
Galaxie (Ford)Gardner Roadster (Gardner Motor Car Company)Geo (Chevrolet)GMCGolf (VW)Grand Am (Pontiac)Grand Cherokee (Jeep)Grand Marquis (Mercury)Grand Prix (Pontiac)Gremlin (American Motors)GTO (Pontiac)GTX (Plymouth)
The correct type is 134A and should be listed as well as the capacity on a decal on the rad support or under side of the hood
It is attached to the valve body inside of the transmission.
Bell housing bolts and the torque converter bolts.
need torque specs for 3.4 pontiac grand am intake and rocker arms
i need the torque sequence for a 1998 pontiac grand am 2.4 quad
Dexron III automatic Transmission fluid should be used in a 2000 Pontiac Grand AM. This can be picked up at almost any general store.
what are the torque specs for lifters on a 2000 Pontiac grand am gt
yes it should bolt right up as well as the original motor and tranny
If your dipstick reads "Full", then you do not need to add any fluid. Be certain to follow manufacturer instructions when checking fluid level. Your torque converter is part of the transmission, when speaking of fluid, so if the transmission is full, the torque converter is also.
The flex plate is bolted to the back of the crankshaft. It connects the motor to the torque converter in the transmission. To replace you remove the transmission and replace it.
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
You have to remove the transmission to replace the torque converter.You have to remove the transmission to replace the torque converter.