I did mine to 27, then 43 foot-pounds. I later learned that you are supposed to torque them to 47.
What do you torque the head bolts on a 1998 nissan altima 2.4 l
25 NM to 30NM
Short bolts-46psi , long bolts- 43psi plus 90 degrees
The 1987 Nissan cylinder had bolt torque specification is 140 pounds. The cylinder head bolts should be torqued in 45 pound intervals.
The head bolts on the Nissan 2.7TD can vary depending on the engine. If the engine is a diesel cargo or serena, the cast iron head has about 80 foot-pounds of torque, but if it's a smaller petrol engine, the bolt head has a 60 foot-pound torque.
First 39nm then 78nm then release all,and finally 39nm. Thats main head bolts not small ones.
The 1994 Nissan Pathfinder had bolt torque specification is 140 pounds. There is not any removal sequence. There is only a sequence to put the bolts in.
The cylinder head bolt torque for Nissan TD 27 is what tightens all bolts from the middle of the block to the outside. The first is a 39-44 nm, second is 54-59 nm and the third is turning the exhaust side cylinder head bolts at a 90 degrees going clockwise.
torque for 2c engine cylinder head bolts
Nissan figaro cylinder head torque setting
torque setting for cylinder head bolts for a skoda felicia
Torque for 292 head bolts is 95 ft lbs