0
What is the total movement indicated on the thimble if it has been rotated one revolution on a micrometer from zero?
Wiki User
∙ 12y ago
It depends on the screw thread pitch (or "lead") in the heart of the micrometer. Typically, screw pitches in common hand-held micrometers are 40 per inch in an Imperial micrometer or 2 per millimetre in a Metric micrometer. Thus, one full turn of the thimble of an Imperial micrometer is 1/40th of an inch (25 thousandths of an inch or "25 thou") and similarly, one full turn of the thimble of a Metric micrometer is 1/2 a millimetre (500 micrometres).
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
A conducting wire is placed inside a magnetic field. When the wire is rotated an electrical current runs through it. Which of these best explains why the wire needs to be rotated?
i
What is moment of inertia of solid sphere about its diameter?
Rotated about a line on the surface ? I = Mass * radius2 . Rotated about a line through the centre : I = (2 * mass * radius2) / 5
What happens when a coil is rotated between two magnets?
The coil will produce an alternating electric current.
What happens if a coil is rotated between two magnets?
The coil will produce an alternating electric current.
What is the difference between the cylindricity and total runout in gd and t?
It is a common misconception that roundness and cylindricity can be checked by taking diametral measurements (as with a micrometer) or by using an indicator and vee block. A diametral measurement does just what the words imply; it measures the diameter. It does not check the shape of the surface which is what roundness and cylindricity control. Total runout involves moving the dial indicator along the length of the part while the part is rotated, so that it controls the cumulative variations of circularity, cylindricity, straightness, coaxiality, angularity, taper, and profile.
What is the total movement indicated on the thimble if it has been rotated one revolution?
the thimble has moved one revolution
When a drive gear with 15 teeth makes one full rotation how far has the driven gear rotated?
It depends on the number of teeth on the driven gear. If it has 15, then it makes one revolution. If 30, then one half of a revolution.
Do the couch cushions velcro on the bottom or can they be flipped and rotated?
No, they can be flipped and rotated.
What is total composite error of gear?
The difference between highest peak and the lowest valley of error line drawn when the gear is rotated by one revolution by a master gear in tight mesh.
How does an electric generation work?
Converts mechanical energy into electricity. Movement of magnetic field across a conductor will cause electron flow. The windings of a generator are rotated within a magnetic field.
How does an electric generator work?
Converts mechanical energy into electricity. Movement of magnetic field across a conductor will cause electron flow. The windings of a generator are rotated within a magnetic field.
How does an electric generators work?
Converts mechanical energy into electricity. Movement of magnetic field across a conductor will cause electron flow. The windings of a generator are rotated within a magnetic field.
Which direction must a camshaft be rotated on a diesel engine with a crankshaft that is rotated clockwise?
counterclockwise
What is a good sentence using rotated?
I rotated my petri dish so i could view it better.
If a pair of parallel lines are rotated which is true?
THE LINE REMAINS PARELL ONLY IF ROTATED IN 180
Yes, the XLR connector can be rotated and locked into position?
Yes, the XLR connector can be rotated and locked into position
What is the meaning of complete revolution?
When something rotates, i.e. round in a circle on its axis, it revolves.The amount it revolves on its axis can be measured in degrees.If something revolves (or rotates) fully, just once, it has moved on its axis a motion of 360 degrees. This is one complete revolution.If it only rotates half-way, like a coin that starts with the head being the right way up, but it revolves or is rotated until the head is upside down, it has rotated/revolved 180 degreeson its axis, and has only done half a revolution.If the coin is totally rotated twice, it has done two complete revolutions.NOTE: A 'revolution' in this sense has nothing to do with fighting, unless, of course, we are actually talking about people who are actually fighting!
